Electric Skateboard Motor BLDC 5065 270KV 1550W
Product Description
Product Spec:
- Max Power: 1550 Watts
- Max Current: 80 Amps
- No-load Current: 1.12A 10V
- Max Volts: 41.5V
- Lipo: 3S-8S (11.1V-29.6V)
- Max Torque: 4Nm
- Motor Resistance: 64mΩ
- Weight: 0.99 lb / 0.45 kg
- The motor length:65mm
- The motor diameter: 50mm
- SHAFT: Diameter 8mm, 20mm length, 3x3x15mm keyway slot.
- Motor Wire: 160mm silicone 16AWG wire with 4.0mm Gold Bullet Connector Male.
- Wire configuration:
- Blue(Heat shrinkable film) = A
- Black (Heat shrinkable film)= B
- Yellow (Heat shrinkable film)= C
- Brushless Motor
- The number of pole: 14
Sensor Wire: Standard RC Sensor Wire JST-ZH 6pin 1.5mm pitch
- Internal PCB with 120 Degree Hall Effect Sensors.
- Motor can be used with or without a sensor. Sensorless operation is most common.
- VESC Sensor Wires required to use with VESC.
- Wire configuration:
- Red = 5v
- Blue = A
- Yellow = C
- Green = B
- Black = GND
What's Our Product Features:
- Stator: Lamination Japan steel
- 12awg high strand silicone wire with 4.0mm gold bullet connectors.
- Both support sensor and sensorless mode!
WHAT'S INCLUDED
- 5065 270KV EPOWER Motor (Fits 50mm Motor Mount)
Reference Information:
- The screws used for the motor are M4 metric bolts. Using our motor mounts, we recommend using M4 Socket Cap bolts.
- Screws to mount the motor are not included with the motor.
- The key for keyawy is not included with motors for shipping
- The mechanical diagram:
Product Image
Img 1
Img 2
Img 3
Img 4
Img 5
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,