Home > Products > Electronics & Electricity > Other Electrical & Electronic

Place of Origin

Henan, China (Mainland)

Brand Name

WEILI

Model Number

MGG

Product Name

BATTRRY Flowmeter

Medium

Conductive Liquid

Accuracy

0.5%

Output

4-20mA /RS485

Power supply

Battery Powered

Application

Water Treatment

Lining

Neoprene , Polyurethane

Communicating

GSM data long-distance wirele

Struction form

Integral type ,Remote type

Electrode material

Corrosion resistance

SUS316

For industrial water, domestic water, sewage, corrosive media, widely used in petroleum, chemical, urea, vinylon and other industries.

Stainless steel coated tungsten carbide

For non-corrosive, highly abrasive media

Hastelloy B(HB)

Hydrochloric acid of all concentrations below the boiling point has good corrosion resistance, but also sulfuric acid, phosphoric acid, hydrofluoric acid, organic acids and other non-oxidizing acid, alkali, non-oxidizing salt solution corrosion.

Hastelloy C(HC)

Oxidative acid, such as nitric acid, mixed acid or chromic acid and sulfuric acid mixed medium corrosion, but also resistant to oxidizing salts such as Fe +++, Cu ++ or other oxidants such as hypochlorite solution above sea level, sea water corrosion

titanium(Ti)

It is resistant to seawater, various chlorides and hypochlorites, oxidative acids (including fuming nitric acid), organic acids, alkalis, etc, and is not resistant to the corrosion of pure reducing acids (such as sulfuric acid and hydrochloric acid). However, if the acid contains oxidants (such as nitric acid, Fe +++, Cu ++), the corrosion is greatly reduced.

Tantalum (Tan)

Has excellent corrosion resistance, and the glass is very similar, in addition to hydrofluoric acid, fuming nitric acid, alkali, almost all chemical media (including hydrochloric acid, sulfuric acid and aqua regia) corrosion.

Platinum - iridium alloy

Almost applies to all chemicals, but not aqua regia and ammonium salts.

Lining material

The main performance

The scope of application

Teflon(PTFE)

1.The most stable chemical properties of plastics in a material that is resistant to boiling hydrochloric acid,sulfuric acid and aqua regia,but also resistant to concentrated acids and various organic solvents, intolerance chlorine trifluoride, liquid oxygen, high velocity liquid oxygen, ozone corrosion.2.Poor wear resistance

Concentrated acid,alkali and other corrosive media

PFA

Corrosion resistance with PTEF,strong anti-negative pressure

Can be used for negative pressure state

F46

1.Corrosion resistance with PTEF.2Can withstand low wear and tear.3,Strong anti-negative pressure.

1.With PTFE 2.Can be used for low abrasive media

Neoprene

1.Have excellent flexibility,a high degree of tensile force,good wear resistance.2.Resistant to the general low concentrated acid, alkali,salt medium corrosion, corrosion resistant to oxidizing media.

Water, sewage, weakly abrasive mud, pulp

Polyurethane

1.Has excellent wear resistance (equivalent to 10 times the natural rubber).2 acid, alkali performance is poor.3Do not use water mixed with organic solvents.

Strong neutral wear pulp, coal slurry, mud and so on