Home > Products > Chemicals > Adhesives & Sealants

GOODPOLY UF RESIN POWDER is a kind of dry powder binders based on urea formaldehyde condensation polymer. Its special designed for wood processing.

Physical Specification
Grade UF 100B UF 100C UF 100D
Appearance White Powder White Powder White Powder
Moisture Content (%) <3 <3 <3
Bulk Density (kg/m3) 500~800 500~800 500~800
Solution (1:0.5 water solution)
Ph Value 8~9.5 8~9.5 8~9.5
Viscosity at 25°C (cps) 4000~7000 3000~6000 2000~5000
Pot Life (2% NH4Cl, 25°C) 2~4H 2~4H 2~4H
Free formaldehyde <1.1% <1% <0.9%
Curing Time (2% NH4Cl, 90°C) 60~120" 80~140" 90~150"

Properties / Benefits
GOODPOLY UF RESIN POWDER provides the following benefits for woodworking:
● High bonding strength
● Suitable for cold or hot pressing project
● Cost effective binder
● Easy for storage, transportation and application

Application
GOODPOLY UF RESIN POWDER may be used in a variety of wood based products as follows:
● MDF, HDF
● Plywood, OSB
● Particle board
● Block board
● Wood engineer flooring
● Wood furniture
● Base binder for various components or one shot powder glue

Dissolving
a) Mixture Ratio:
Item Ratio( PBW)
UF Powder 100
Water 50~150
(according to actual situation)

b) Dissolution Method:
Put 2/3 of the total needed water into mixer, and then add UF powder in. Switch on the mixer with speed of 50~150 rotations / minute, after glue powder being completely dissolved, put the remained water in mixer gradually along with stirring, keep stirring for further 3~5 minutes until the glue solution is mixed homogeneously.

Please note that GOODPOLY UF RESIN POWDER doesn’t contain hardener. Users should add hardener before use. It’s s ested to add hardener into the mixed liquid glue according to actual requirement, and control the active period of liquid glue.

Storage
GOODPOLY UF RESIN POWDER may be stored in sealed bags under dry cool place for at least 12 month under temperature lower than 25°C. Exposure to high temperature or humidity would cause caking problem. Any opened package must be resealed and kept tightly closed immediately to avoid absorbing water from moist air. Pallets should not be stacked or being under pressure.