Home > Products > Electronics & Electricity > Optical Fiber, Cable & Wire > Optical Fiber

Fiber optic cable

1.Overview

--Fiber optic cable is single-mode and dual-mode direct buried and underwater communication cable .

--Fiber optic cable is produced according to IEC60794-1-1 standards, while referring to GB / T7424.1-98 standards.

--Fiber optic cable is mainly used for communications engineering, medical applications, sensor applications and smart residential wiring.

--With large capacity, low attenuation, anti-electromagnetic interference, light weight, easy to lay and other features.

2.Standards of fiber optic cable:

      IEC60794-1-1

      Q / XBGL004 (standard)

3.The use of features of fiber optic cable:

        a) Fiber optic cable bandwidth: 10GHz.km;

        b) Tensile strength of fiber optic cable: 1500N;

        c) Attenuation coefficient of fiber optic cable: 0.2-0.3dB / km

ADSS Cable

Introduction and application of adss cable(fiber optic cable)

ADSS Cable (All Dielectric Self-supporting Aerial Cable) is loose tube stranded fiber optic cable. Fibers are positioned into loose tube made of high modulus plastics. The tubes are filled with a water-resistant around FRP (Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular fiber optic cable core. After the fiber optic cable core is filled with filling compound, it is covered with thin polyethylene (PE) inner sheath. After two layers of aramid yarns are applied in two directions over the inner sheath as strength member, the fiber optic cable is completed with PE or AT outer sheath. After two layers of Aramid yarns are applied in two directions over the inner sheath as strength member, the fiber optic cable is completed with PE or AT outer sheath.