Home > Products > Electronics & Electricity > Electronic Instrument > Other Electronic Instrument

Support for this product is limited to customers who have already adopted these products. If adopting new products, please consider the successor.

Functions

Notes:

1. The FP6 Terminal for the PG-FP6 includes parameter files and firmware, which are provided separately for the PG-FP5, and USB drivers.
2. This function facilitates use of USB power in places where power outlets are not available when reprogramming the field. When connecting the product directly to the USB port of a PC, use the power supply adapter that comes with the product.

Performance

Improved Download Speed

With the PG-FP6, the time required for downloading program files to the main unit was reduced compared with the PG-FP5.

Note: These numeric values were measured using a program with a file size of 16MB.

Overview

The PG-FP5 installed in a system is a tool for erasing, programming, and verifying programs on Renesas MCUs with on-chip flash memory.

Topics

The PG-FP5 has been discontinued. The acceptance of final orders was in May 2018. If adopting new products, please consider the successor, the PG-FP6.
[PG-FP6] Higher productivity and security than its predecessor, PG-FP5>>

Successor

PG-FP6

Note: the PG-FP6 does not support V850 and 78K with dual power supply flash memory, which assume mass production with mask ROM. Use programmers produced by partners for programming of the V850 and 78K with dual power supply flash memory. Refer to Function and performance comparisons between PG-FP6 and PG-FP5 >>

Details of upgrade(See Tool News)

Operating Environment

How to find the version number

Features

• Standalone programming
• PC-controlled programming using dedicated GUI
• Ability to store settings for up to eight programming environments
• Designed specifically for use on production lines (command control or remote control)
• Programming a unique code to a designated area of flash memory
• Security setting can be changed with the the Manager function
• Supports self-testing function

Control panel suitable for the stand-alone operation

Easy-to-Use Graphical User Interface (GUI)

Major Functions

• Downloading and uploading program files and parameter files
• Editing program files (by using HEX editor)
• Checksum calculation
• Saving the action logs
• Manager function (Prohibition of uploading program files and changing the password and settings, etc.)
• Feasibility of blank checking, erasing, programming, verifying, reading, settings and obtainment of Flash options information, checksum and programming after erasing
• Execution of self-testing function
• Writing in the minimum unit of the flash memory is available for the following devices
  • RX family
  • RH850 family (excluding the RH850/P1x-C group)
  • V850 family (V850E2/Fx4-L, V850/FF4-G, V850E2/FG4-G, V850E2/Px4-L, or V850PG4-S only)

Components

• PG-FP5
• USB cable
• Serial cable
• Target cables of two sorts (14-pin and 16-pin types)
• GND cable
• Setup manual

Note: Except for Europe, the power supply adapter, QB-COMMON-PW-xx, is not bundled in the product package of PG-FP5. Please purchase it separately.

System Configuration

Target Devices

• RL78 Family
• RX Family
• RH850 Family
• Renesas USB Power Delivery Family (C30 Group)
• ICs for Motor Driver/Actuator Driver (ICs for Motor Control)
• SuperH Family
• V850 Family
• 78K Family
• R8C Family