Home > Products > Electronics & Electricity > Electronic Components > Circuit Board

SO Series Signal Isolation Amplifier (DIN 1X1 ISO ISO L-U(A)-P-O


Features:

Accuracy linearity error level: 0.1\0.2\0.5 level
4-20mA/0-5V/0-10V standard signal input
0~100mA/0~500mA/0~1A current signal output
0~1V(max 1A)/0~5V(max 500mA) voltage signal output
Signal input/output 3000VDC isolation
Auxiliary power supply: 12V\15V or 24V single power supply DC
No isolation between auxiliary power supply and output signal
Standard DIN rail, industrial temperature range: - 45 ~ + 85 degree

Application:

Industrial field signal isolation and amplification
Amplify current signal or enhance voltage signal drive capability
Solenoid valve drive, solenoid switch controller
Drive coil or high-power load
Ground interference restraint

General parameters:
Accuracy ------- 0.1% 0.2% 0.5%
Response time ------- 300mS
Auxiliary power supply ------- DC5V\12V\15V\24V, ± 10%
watt consumption ------- < 10W
Input ------- DC voltage/current signal
Temperature Drift ------- 200ppm/degree
Load capacity ------- <5W Isolation ------- signal input/output
Operation Temperature ------- -45 ~ +85 degree
Dielectric resistance ------- ≥ 20MΩ
Operation Humidity ------- 10 ~ 90% (non-condensing)
Withstand voltage ------- signal input/output
Storage Temperature ------- -45 ~ +80 degree 3000VDC, 1 minute, current leakage 1mA
Storage Humidity ------- 10 ~ 95% (non-condensing)
Withstand peak voltage------- 3KV, 1.2/50us(max)
+​