Home > Products > Industrial Supplies > Tools > Abrasives

Hygronom is also called moisture meter or dew-point meter, which is used to measure humidity of flue gas emitted by pollution source. According to measured humidity, it converts wet gas concentration into dry gas concentration. In addition, it also can be used in industrial online humidity monitoring.

Digital relative humidity meter humidity meter gauge meter humidity is equipped with internal high-precision capacitance digital temperature & humidity sensor. The installation method adopts in-situ immersion installation. It is a self-developed product, of which, core component is from Switzerland.

Put sensor inside stack to get in touch with flue gas. The probe needs preheating to prevent gas from condensation, which will affect measurement of moisture in flue gas. After gas contacts with measurement chip, the chip will change capacitance to measure flue gas concentration.

HM-200 hygronom is a general humidity meter humidity test meter meter to check humidity, which employs microprocessor as the core, and frequency conversion icon oxygen sensor as measuring unit. The installation method adopts heat tracing pipeline installation.  It is a self-developed product, of which, core component is from Switzerland.

Under effect of air pump, the flue gas inside stack enters measurement module after heating from heat tracing probe. The whole process of extraction, measurement and discharge is with heat tracing to prevent gas from condensation, which will affect measurement of moisture in flue gas. The flue gas enters measurement module after heating and frequency conversion icon oxygen sensor will start to measure gas concentration. After measurement, the gas can get into analyzer for measurement of other components.

High-temperaure hygronom is also called high-temperauture moisture meter or  high-temperauture dew-point meter, which is used to measure humidity of flue gas emitted by pollution source. According to measured humidity, it converts wet gas concentration into dry gas concentration, widely applied in industrial online humidity monitoring.

HM-300C heating tracing hygronom (resistance-capacitance) is a self-developed product, which employs microprocessor as the core, and imported high-temperaureresistance-capacitance temperature & humidity sensor as measuring unit, matched with multiple signal output methods including 4-20mA, RS232, RS485 and etc. The installation method adopts heat tracing pipeline installation.  During sampling process of CMES, it measures humidity of flue gas and transmits the data to IPC through RS232.

We are one of the leading humidity meter manufacturers, RFQ today!