Home > Products > Industrial Supplies > Construction Machine

~Lightweight Brick Production Line, Lightweight Brick Equipment

Lightweight brick production line, also known as light brick equipment, is a new type of building materials equipment, is the production of new wall materials equipment, the production of light bricks with light, sound insulation, heat insulation, seismic and other properties, so it is deeply loved by users and builders. Lightweight brick equipment is mainly used in the production of light bricks. Lightweight bricks are mainly made of fly ash, lime, cement, gypsum and other raw materials. It is a new lightweight, high temperature resistant building material made by the process of raw material processing, mixing, pouring, static stop, cutting and autoclaving under high pressure. It has the characteristics of light bulk density, good heat preservation effect, good sound absorption and processability.

Advantages of Lightweight Brick Equipment/Lightweight Brick Production Line:

1. Lightweight block production equipment Lightweight brick equipment has a wide range of raw materials, high waste rate and low cost. Lightweight brick production equipment Lightweight brick equipment is mainly made of fly ash, slag, sand, aeolian sand, stone powder with low soil content and tailings sand, etc. (any of which can be used). It has high profit and waste rate, low cost and large profit.

2. Light brick production equipment has high technical content. One of its core technologies, gas-making agent, is made up of several readily available raw materials in proportion to achieve the effect of brick-making by air.

Advantages of light bricks:

1. Economy: It can reduce the cost of foundation, reduce the cross-section of frame and save steel mixing.

Condensate can remarkably save the comprehensive cost of buildings. Compared with solid clay brick, the design of light brick can reduce the overall cost by more than 5%.

2. Practicability: Using light bricks can increase the area of use, at the same time, because aerated concrete has good insulation effect, indoor temperature in hot summer is 2-3 degrees C lower than using solid clay bricks, air conditioning is used to reduce electricity consumption.

3. Constructability: Light bricks have good processability and easy construction. Because of their large size and light weight, they can reduce labor intensity, improve construction efficiency and shorten construction period.

Production process of light brick production line:

01. Raw material storage and treatment

Through reasonable planning of raw material storage area and improving raw material handling methods, our company avoids such problems as dust, noise and solid waste, so as to create a comfortable working environment for workers.

02. Measuring burden pouring

Slurry, cementing material, gypsum and aluminium powder are measured by corresponding automatic weighing, and then stirred at high speed in the mixer. After pouring into the mold box, air bubble combing is carried out. The whole system is controlled automatically by PLC to ensure the accuracy and efficiency of the operation.

03. Stop and cut

Smooth static-stop control mode can prevent the damage to the internal structure during the process of bloating and expansion of the green body. In the six-sided cutting scheme provided by our company, the efficient and smooth cutting machine and the scrap removal overturning device are the core equipment.

04. Autoclaving and finished product treatment

Strength and properties of bricks are obtained by autoclave. The product after leaving the kettle can not only improve the qualified rate of the product, but also solve the problem of simultaneous separation of block and plate through our company's break-off packing system.