Home > Products > Electronics & Electricity > Other Electrical & Electronic

BMC/SMC Mould 1BMC/SMC Mould 2BMC/SMC Mould 3
  • BMC/SMC Mould 1
  • BMC/SMC Mould 2
  • BMC/SMC Mould 3

BMC/SMC Mould

Model:-
Brand:waiwaitree
Origin:-
Category:Electronics & Electricity / Other Electrical & Electronic
Label:housing mould , household mould , bmc composite
Price: US $500000 / Set
Min. Order:1 Set
Inquire Now

Member Information

Detail

ZHEJIANG AOBANG TECHNOLOGY CO.,LTD

Free MemberZhe Jiang - China
Last Online:24 Jul, 2020

Product Description

BMC/SMC plastic Moulding Description:

 

We mainly use injection molding and pressure molding as the methods. When designing the flow channel and parting surface,  we think that the cavity pressure should be as small as possible, especially some small ribs, as well as the smooth exhaust, the discharge position, shape, and material flow direction, which would all be fully considered. And the active exhaust must be complete with an overflow. We guarantee the appearance and strength. With the Vacuuming structure, the mold temperature balance is consistent as the appearance and strength of the product shall be guaranteed as well.

 

BMC/SMC injection molding Features:

 

high insulation, chemical resistance, high fire resistance, good water resistance, accurate size, stable working performance, light weight, high strength, acid and alkali resistance, waterproof, moisture-proof, low energy consumption, no waste, no need to clean the mold cavity, mold The temperature is stable, the temperature difference is small, the breakage is short, poor appearance is less, and the efficiency is high.

 

About BMC/SMC Moulding:

 

The basic process of the compression molding process is to place a certain amount of the pre-treated molding material into a preheating compression mold, and apply a higher pressure to fill the mold cavity with the molding material. Under the predetermined temperature conditions, the molding material is gradually solidified in the cavity, and then the SMC product is taken out from the stamper, and the necessary auxiliary processing is performed to obtain the final product.

 

The SMC molding process of the composite molded product is a process of solidifying into a product in a cavity after the binder is loaded or heated under the condition that the curing agent is present or heated. Molding temperature, molding pressure and mold exhaust, temperature balance, and mold structure all affect the quality of SMC products. It is necessary to determine the best solution under the consideration of various influencing factors.

 

BMC is the initial abbreviation of English Bulk Molding Compound, and the Chinese name is a group molding compound. Pre-mixed into a paste by unsaturated polyester resin, low shrinkage/low profile additive, initiator, internal mold release agent, mineral filler, etc., and then added thickener, colorant, etc., with different lengths of glass fiber, in special Stirring in the kettle is carried out to carry out a thickening process, which finally forms a dough-like intermediate material which can be used for molding and injection molding.

The bulk molding compound manufacturing process basically follows the same rules as the injection mold. However, SMC and BMC molds also have different characteristics from injection molds, such as flow path, exhaust, heating, cavity pressure and balance, parting structure, mold steel used and precision, shrinkage and injection molds. Differently, the BMC mold is molded at a high temperature, and the plastic mold is molded at a normal temperature.

 

SMC BMC molds require heating rather than cooling systems. The temperature of the mold is usually between 130 and 160. It is very important to keep the temperature of the mold and the exhaust gas when designing the mold. The mold is easier to fill, the product is not easy to be deformed, and the surface is better. Commonly used heating systems are steam, oil and electric heating rods.

 

Vacuum assisted systems for BMC injection moulds and SMC molds: Products with Class A surfaces are usually vacuum-assisted, and the internal cavity and vacuum insulation of the mold are very important. The mold must have a sensor and a vacuum system to measure the mold temperature and pressure vacuum. Production SMC and BMC molds must guarantee high quality, long life and economy. As one of the most professional sheet molding compound suppliers  in China, Aobang Technology Co., Ltd.'s years of experience in the production of SMC and BMC molds and proficiency in machine, mold, material and process can ensure the maximum benefit of customers.

 

Zhejiang Aobang Technology Co., Ltd., established in 2010, is a backbone enterprise that manufactures composite moulding at home and abroad. We sincerely hope to establish long-term and strong partnership with domestic and foreign businesses and business circles. We hope to gain recognition and support from our customers and to develop mutual cooperation.  Just feel free to contact us!


Payment Terms:T/T

Product Image

BMC/SMC Mould 1
Img 1
BMC/SMC Mould 2
Img 2
BMC/SMC Mould 3
Img 3

Send Inquiry to this Member

ZHEJIANG AOBANG TECHNOLOGY CO.,LTD

No.62,zhidailang,sha village,luoshe town, deqing,huzhou city, zhengjiang, China.

Phone:
0572-8255919
Fax:
Contact:
waiwaitree (Foreign trade manage)
Mobile:
15657163173

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Other Electrical & Electronic Made In China Products

,  

Other Electrical & Electronic China Suppliers and China Manufacturers