Model: | 30watts 980nm |
---|---|
Brand: | Dimed |
Origin: | Made In China |
Category: | Industrial Supplies / Industrial Supplies Stocks |
Label: | diode laser surgery , veterinary therapy , 30watts 980nm |
Price: |
US $8000
/ pc
|
Min. Order: | 1 pc |
Last Online:07 Nov, 2019 |
Laser Assisted Lipolysis-Cutting edge treatment options for cellulite and body shaping
Who is it for?
Petlas 30watts 980nm laser system is ideal for those wanting to tighten skin while eliminating fat deposits and cellulite.it can target almost all areas of the body including:
• Belly
• Thighs
• Arms
• Buttocks
How the Petlas 30watts 980nm works for lipolysis?
The procedures were performed in the hospital, and the type of anesthesia was general, regional (epidural), or local with sedation, according to the extent and indications of each case. using a 0.9% saline solution with a temperature of around 4°C, and 1:500,000 epinephrine. The infiltration was performed preferably with the aid of a continuous pressure system at 150 mm Hg, provided by placing the reservoir solution with a cuff pressure drop, to allow a homogeneous distribution during infusion with a 2-mm-diameter needle. A uniform deposit was performed only in the deepest layer, parallel to the muscular plane, to avoid tunneling the fat tissue. The infused volume was equivalent to the estimated volume drawn from each region. This infiltration technique took 7 to 8 min to infuse 1 liter into each decubitus, an ade -quate period for vasoconstriction.
A 980-nm-wavelength diode laser equipment was used in all treatments. A 2-mm-diameter rigid cannula with a 600-µm optical fiber was used to transfer energy to the tissues. The passage of the laser was initiated in the deep layers, with slow fan-shaped movements, at a rate of about 2.5 cm/s, from the incision, with application of back-and forth laser movements, always with the free control of the operator’s hand on the treated region to maintain the distance from the end of the fiber to the surface. At the end of the outward stroke of each passage, the fiber end was maintained at a safe distance from the skin, with the aid of a red light display, in order to avoid injury. After the passage of the annula into the deeper plane, passes were made with the same care in the middle plane, and then the more superficial plane to the skin surface.
For body treatment, power was maintained between 18 and 22 W, except in the submental region, inner arms, and thighs, where 14 to 16 W was used
Advantages:
Fast Facts
Ideal for treating fat and cellulite
Suitable for all body areas (except breasts)
No side-effects
Non invasive, needle free
Absolutely pain free
The use of lipolysis with a 980-nm diode laser as an adjunct to liposuction was safe and reproducible. The observed
results confirm that the diode laser is a reliable option with good outcome for patients undergoing liposuction.
Techncal Specification
Laser Name: PETLAS
Laser Type: GaAlAs Diode Laser
Wavelength: 810nm 980nm 1470nm 1064nm
Maximum Power: 20W/30W 20w/30w 16watts 30watts
Operation Mode: CW, Single Or Repeat Pulse
Pulse Duration: 10us- 3s
Repetition Rate: 0.2Hz- 50KHz
Pilot Beam: Red Diode Laser Of 650nm, Power<5mW
Control Mode: True Color Touch Screen (8 inches, resolution 768*1024)
Transmission System: Medical Fibers 400nm With SMA905 Connector
Dimensions: 305(W)*270(L)*145(H) mm
Weight: 3Kg
Payment Terms: | TT |
---|---|