Model: | BD-FS-30 |
---|---|
Brand: | Baudcom |
Origin: | Made In China |
Category: | Electronics & Electricity / Telecommunication & Broadcasting / Network Communications Equipment |
Label: | fiber tool , fusion splicer , ftth |
Price: |
US $650
/ pc
|
Min. Order: | 1 pc |
Last Online:21 Nov, 2019 |
INFORMATION
Features
*Small size and light weight
*7s splicing and 26s heating
*4 motors accurate alignment technology
*Automatic & real-time ARC calibration
*250 cycles splicing & heating once charged
*Inductive heater, not heating without fiber
*Apply to bare fiber, pigtail, drop cable etc.
*Specially design for FTTH/FTTx projects
Specifications
Applicable fiber |
SM(G.652), MM(G.651), DS(G.653), NZDS(G.655), others(including G.657) |
Fiber count |
Single |
Applicable fiber dimensions |
Cladding diameter: 80 -150μm, Coating diameter: 160 – 900μm |
Typical splice loss |
0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS) |
Return loss |
>60db |
Fiber cleaved length |
10-16mm (coating diameter< 250μm ), 16mm(coating diameter: 250-1000μm ) |
Splicing program |
40 groups |
Operate mode |
Manual, Automatic |
Auto-heating |
Available |
Typical splicing time |
7 seconds |
Typical heating time |
26 seconds |
Fiber view magnification |
250X(X or Y view), 125X(X and Y view) |
Viewing method and display |
2 CMOS cameras, 4.3 inch color LCD monitor |
Storage of splice result |
4000 results |
Loss evaluation |
Available |
Tension test |
1.8-2.2N |
Interface |
GUI menu interface, easier operation |
Battery capacity |
5200mAh, typical 250 cycles(splice and tube heat), pl able inner Li-battery |
Power supply |
Adaptor, input: AC100-240V(50/60HZ), output: DC13.5V |
Electrode life |
More than 4000 ARC discharges, can be replaced conveniently |
Terminals |
USB 2.0 port, for uploading splice results and upgrading software |
Operating condition |
Altitude: 0-5000m, Humidity: 0-95%, Temperature: -10℃~+50℃;Wind speed: max 15m/s |
Dimension |
149mm(L)x120mm(W)x127mm(H) |
Weight |
90kg including battery
|