| Model: | RT-1M9C |
|---|---|
| Brand: | Rudder Tape |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Insulation Material |
| Label: | acrylic filamenttape , transformer tape , hightemperature tape |
| Price: |
US $1.89
/ sqm
|
| Min. Order: | 5000 sqm |
| Last Online:11 Nov, 2022 |
| RT-1M9C |  |
|||||||||
| Mono-directional Filament Tape (Residue free) | ||||||||||
| Product Description | ||||||||||
| RT-1M9C is a medium strength fiberglass reinforced biaxially-oriented polyester (Pet) film tape with solvent acrylic based adhesive with clean removal charteristic. Exhibits steady adhesion to wrapping and bundling, transformer uses, etc. | ||||||||||
| Main Application | ||||||||||
| * Steeling coil bundling, | ||||||||||
| * Electrical equipment uses | ||||||||||
| * Transformer uses | ||||||||||
| * Transport securing, etc | ||||||||||
| Construction | ||||||||||
| *Backing: | Polyester film | *Adhesive: | Acrylic adhesive | |||||||
| *Backing Color: | Clear | *Reinforcement: | Mono-directional continuous glass yarn | |||||||
| Typical Physical Properties | ||||||||||
| Note: The following technical information and data should be considered representative or typical only, and should not be used for specification purposes. Test before massive use is recommended. | ||||||||||
| Typical Physical Properties | ||||||||||
| Total Thickness: | 0.14 ± 0.01mm | ASTM D-3652 | ||||||||
| Adhesion to Steel (90°): | ≥ 12 ± 2 N / in | ASTM D-3330 | ||||||||
| Tensile strength: | ≥ 650 N/ 25mm | ASTM D-3759 | ||||||||
| Elongation at Break: | 4~6% | ASTM D-3759 | ||||||||
| Service temperature | -20°C to 150°C | |||||||||
| Storage Conditions | ||||||||||
| Store behind present stock. Store in a clean, dry place. Temperature of 4~26 ℃ (40~80 ℉) and 40~50% relative humidity are recommended. Rotate your stock. | ||||||||||
| Payment Terms: | TT/LC |
|---|---|
