Model: | 610mm*150mm*40m |
---|---|
Brand: | FBD |
Origin: | Made In China |
Category: | Metallurgy , Mining & Energy / Metallurgy & Mining / Non-ferrous Metal Products |
Label: | Titanium basket , Anode Basket , zirconium basket |
Price: |
¥150
/ pc
|
Min. Order: | 1 pc |
Last Online:19 Oct, 2024 |
Titanium anode basket
The advantage of using the titanium basket:
1. Can control the ratio of anode and cathode effectively.
2. Anode’s dissolubility are good, resulting less anode mud.
3. Anode material loading or added convenience.
4. Full use of anode materials, and save the energy.
5. Titanium copper features: Can be ensure the original copper conductive properties, also use titanium covered the copper not corrode by the solution, and greatly reduced the plating, electroplating liquid pollution.
Specification(high*width*thickness) |
weight |
305mm*150mm*40mm |
0.55-0.6KG |
457mm*150mm*40mm |
0.7-0.75KG |
610mm*150mm*40mm |
0.85-0.9KG |
760mm*150mm*40mm |
1.0-1.1KG |
914mm*150Mm*40mm |
1.2-1.3KG |
Use method1. Titanium’s electrical conductivity is poor, linked to electricity current is not more than 0.26A/CM2 or leptospira will fever and cause the solution temperature rise, Increase in cooling capacity, waste energy, even fever leading burn out the plastics tank.. If titanium basket hook fever obviously, increase the titanium basket or titanium basket hook size to improve the cross-section of conductive titanium basket.
2.Titanium basket hook and electrode do not adopt flat or round interface, this metod easy make poor contact and leading spot corrosion.
3.Titanium basket mouth should be slightly higher than the solution level in orde to prevent the anode residue flow out.
4.Titanium basket bottom should be higher than parts 100-150mm, in order to avoid the bottom parts electric current are too concentrated, causing burning.
5.Titanium basket should contact with the anode closely, or anode potential on the basket increased dramatically, occur releasing oxygen and chlorine evolution, leading titanium demage and additive additive.
6.In order to prevent make a burr on the coating and should be outsourced a anode basket bag outside the titanium basket, as the bag is long run and not removed, so it is s ested to use “double-bag” method.
7.The anode bag should pack the titanium basket tightly, the bag bottom ought to leave few inches to store the possible anode mud.
Common titanium basket bag characteristics
Fabric types |
Cloth appearance |
Density |
Applicative liquid |
Remarks |
P750(polypropylene fiber) |
smooth |
180-200 mesh |
Acid, alkali |
Poor high temperature,long run will be harden, apply for general quality requirements |
P751(polypropylene fiber) |
Have hair |
250-300 mesh |
Acid, alkali |
Poor high temperature,long run will be harden, apply for high quality requirements |
Taiwan cloth(terylene) |
One sidesmooth, The Other side has hair |
350-400mesh |
Acid, weak alkali |
Good high temperature, long run maintain soft, apply to higher quality plating requirements |
Payment Terms: | TT |
---|---|