Home > Products > Chemicals > Chemical Reagent

Plastic Mold Release Agent 1. Product description: cxl-360 is a high-performance emulsion mold release agent based on SILICON, which meets the environmental protection standards of Europe and America. It has passed the SGS environmental protection certification, and is non-toxic and non-irritating, to form a heat-stable film between the mould and the product, resulting in a smooth surface, no corrosion to the mould, no miscibility with plastics and plastics, convenient demoulding, and good lubrication between metal and non-metal, reduce the cost of die maintenance and repair. Because of its high stability, it can be used with water at will, without layering or oil separation, and can be used in severe temperatures-70 ~ 350 NIE degrees. Traits and data indicators: 1. APPEARANCE: Milky White Liquid or Milky Blue Liquid 2. INGREDIENT: Silicone Oil and special Surfactant 3. Active ingredient: 99.99% 4. IONIC: 5.Ph : 6.5 ~ 76. SOLUBILITY: extremely soluble in cold water. Specific gravity: 0.985. FEATURES: 1. Easy to dilute, easy to use, when the mold temperature is still very stable. 2. Long Shelf Life, sealed and stored at room temperature up to 1 year. Product application: this product is generally used for plastic products (bottle stopper, screw cap, barrel stopper, plastic bottle, plastic pad, data line transpanter, wire and cable, mobile phone shell, plastic sheet, etc. . Dilute with water as needed, then spray directly onto the mold with a spray gun or a brush / rag. 2. It's 200 times thinner. Packaging, storage and transportation: 1. This product packing specification is 50kg / barrel or 200K / barrel, may also pack according to the customer request. 2. This product according to the non-dangerous goods storage and transportation, should be stored in a dry ventilated cool place, to avoid strong sunlight exposure and acid, alkali contact.