Home > Products > Industrial Supplies > Machinery > Pumps Vacuum Equipment

Zlb vertical axial-flow pump

Product introduction:

ZLB pump is single-stage vertical axial-flow pump,ZWB /ZXB pump is overlarge horizontal axial-flow pump,suitable for pumping clean water,sewage,rain water and slight corrosive liquid,the temperature of the liquid is not higher than 50℃.This pump is a large flow and low water head pump,can be used in farmland irrigation,water conservancy projects,urban water supply & drainage & sewage treatment,power plants,salt plants and farms circulating water and dock level,and also used in metallurgy,chemical industry and other industries.It’s used very widely.

Product characteristics:

For the Zhonglan vertical axial-flow pump, the pump and the motor are installed in two basic layers,the axial thrust of the pump is borne by the motor,the bearing is rubber guide bearing, and the seal is packing seal. For horizontal(inclined) axial-flow pump,the whole pump system is composed of hydraulic channel,pump body,drive,motor and assistant equipment. The driving part is the gear reduction box.

Use condition:

It is mainly used in the reconstruction of pump station,flood control and drainage,urban flood control pump station,irrigation pump station,amusement park and large flow drainage pump station.

Model implication:

80ZLB—5

80-outlet diameter of the pump( means 2000/25=80）

Z-Axial-flow pump

L-vertical

B-Semi-fixed blade(G is fixed blade)

5-pump water head of the designed point

Performance parameters:

1.Water head range 1-20m(according to the designed water head)

2.Flow 0.1m3/s~~3.6m3/s，means 300m3/h~~15000m3/h (according to the site water intake and designed displacement and product quantity)

3.Motor rated power 18.5KW~~300kw(designed value)

4.Rated voltage grade 380V/660V high voltage need to be customized(voltage)

vertical axial-flow pump Order instruction:

the accurate product model,performance parameters(flow,water head range,motor power,blade mounting angle) and service voltage should be indicated in the contract.

2.the control cabinet should indicate the starting manner(directly start,self-coupling step-down start,soft start,frequency conversion start,etc.) and level control manner(float level,pressure transformer digital display level). Installation manner(indoor,outdoor)

3.if a terminal box is needed ,pls indicate it is control type or linear type. 4.the normal suply length of the submersible cross-flow pump cable is 8meters,if there is a special demand,pls specify. 5.if there is any other special requirements,pls contact with our technique department.

If you want to know more related products, please click here.