Home > Products > Chemicals > Inorganic Chemical Materials > Inorganic Acid

Ordinary culture medium: a kind of artificial preparation, suitable for the growth and reproduction of microorganisms or the production of metabolites, or for other mixed nutrients.

 

 

 

Characteristics: any culture medium should have the six nutrient elements needed by microorganisms and should be proportioned appropriately. Once prepared, it must be sterilized immediately.

 

 

 

Uses: promote the growth of microorganisms; accumulate metabolites; isolate microbial species; identify microbial species; count microbial cells; preserve microbial species; prepare microbial products.

 

 

 

General configuration steps of ordinary culture medium

 

1. Mix ingredients

 

Formula conversion → add a small amount of water (distilled water, natural water) into the container → weigh all kinds of drugs according to the formula (add in order) → add enough water (one medicine and one spoon, and immediately cover the bottle after taking the medicine).

 

 

 

2. dissolution

 

Starch dissolving: a small amount of cold water is mixed into paste

 

Heat and dissolve, especially the medium with agar must be boiled. The melting temperature of agar is 95-97 ℃  and it needs to be stirred while heating to prevent burning.

 

 

 

3. Adjust PH

 

Adjust the medium to the required value with 1n hydrochloric acid or 1n NaOH.

 

 

 

4. filtration

 

Filter paper or cotton. (sometimes it can be omitted)

 

 

 

5. sub package

 

Generally, the culture medium is placed in a triangular flask or test tube for sterilization.

 

 

 

6. Packing

 

After repacking, plug the cotton plug, and wrap the cotton plug with kraft paper to prevent water from entering and wetting the cotton plug during sterilization.

 

 

 

7. sterilization

 

Carry out high-pressure steam sterilization according to the temperature and pressure required on the formula. If the sterilization temperature is too high, the nutrients will be destroyed and cultured

 

The sugar and amino acid in the medium will darken the color of the medium.

 

 

 

8. pendulum

 

After sterilization, the tubes that need to be placed in an inclined plane should be placed in an inclined position while it is hot, so that they will solidify into an inclined plane, accounting for about one second of the tube length.

 

 

 

9. storage

 

 

 

The medium can be used without pollution after being placed at 30 ℃ for one day. It is generally wrapped with kraft paper and stored in 2-8 ℃ refrigerator for standby.

 

 

 

Configuration principle

 

 

 

1. Choose the right nutrients

 

Generally speaking, all microbial growth and reproduction need nutrient culture medium containing carbon source, nitrogen source, inorganic salt, growth factor, water and energy. However, due to the complex types of microbial nutrition, different microorganisms have different needs for nutrients. Therefore, first of all, we need to prepare targeted culture medium according to the nutritional needs of different microorganisms.

 

 

 

2. appropriate concentration and proportion of nutrients

 

When the concentration of nutrients in the medium is appropriate, the growth of microorganisms can be good. When the concentration of nutrients is too low, it can not meet the needs of normal growth of microorganisms. When the concentration is too high, it may inhibit the growth of microorganisms.

 

 

 

3. PH control

 

The pH of the medium must be controlled within a certain range to meet the growth and reproduction of different types of microorganisms or the production of metabolites.

 

 

 

4. redox potential

 

Different types of microbial growth have different requirements on redox potential (f). Generally, aerobic microorganisms can grow normally when the F value is above + 0.1V, and it is suitable to grow normally when the F value is + 0.3V + 0.4V. Anaerobic microorganisms can only grow when the F value is below + 0.1V, facultative anaerobic microorganisms can breathe when the F value is above + 0.1V, and ferment when the F value is below + 0.1V.

 

 

 

5. Selection of raw materials

 

In the preparation of culture medium, we should try to use cheap and easy material to obtain raw materials as the components of culture medium, especially in the fermentation industry, and the amount of culture medium is very large, and the use of low-cost raw materials reflects its economic value.

 

 

 

6. Sterilization treatment

 

In order to obtain pure culture of microorganism, contamination of mixed bacteria must be avoided, so the equipment and workplace should be disinfected and sterilized.

 

ELEX Biological Products (Shanghai) Co., Ltd., established in 2013,we provide ordinary culture media and swab sampler,contact us.