| Model: | DIN Standards |
|---|---|
| Brand: | Manufacture Stockholder Distributor of DIN Product |
| Origin: | Made In Germany |
| Category: | Industrial Supplies / Machine Hardware / Fastener & Fitting |
| Label: | DIN Materials , EN Materials , DIN EN Standard |
| Price: |
-
|
| Min. Order: | - |
| Last Online:02 Oct, 2024 |
Manufacture Stockholder Distributor of DIN Materials
We are Manufacture, Stockholder & Distributors of EN Standard Materials, EN Standard Products, EN Approved Materials, EN Approved Products, DIN Standard Materials, DIN Standard Products, DIN Approved Materials, DIN Approved Products, ISO Standard Materials, ISO Standard Products, ISO Approved Materials, ISO Approved Products Pipes, Tubes, Sheets, Plates, Strips, Coils, Wires, Wire-Rod, Rods, Bars, Round, Square, Hex, Hexagonal, Nuts, Bolts, Washers, Fasteners, Fittings, Electrodes, Filler Wire, TMT Bar, Cold Drawn, Hot Rolled, Hot Forged, Cold Forging, Forgings, Castings, CNC Machined, Components, Wire Rope, Strands, Annealed, Normalized, Hardened & Tempered
| Standard No | Title of Standard | |
| EN 12668-3:2000 | Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Combined equipment | |
| EN 12669:2000 | Direct gas-fired hot air blowers for use in greenhouses and supplementary non-domestic space heating | |
| EN 1267:1999 | Valves. Test of flow resistance using water as a test fluid | |
| EN 12670:2002 | Natural stone. Terminology | |
| EN 12671:2000 | Chemicals used for treatment of water intended for human consumption. Chlorine dioxide | |
| EN 12672:2000 | Chemicals used for treatment of water intended for human consumption. Potassium permanganate | |
| EN 12673:1999 | Water quality. Gas chromatographic determination of some selected chlorophenols in water | |
| EN 12674-1:1999 | Roll containers. Terminology | |
| EN 12674-2:2002 | Roll containers. General design and safety principles | |
| EN 12675:2001 | Traffic signal controllers. Functional safety requirements | |
| EN 12676-1:2000 | Anti-glare systems for roads. Performance and characteristics | |
| EN 12676-2:2000 | Anti-glare systems for roads. Test methods | |
| EN 12678:2000 | Chemicals used for treatment of water intended for human consumption. Potassium peroxomonosulfate | |
| EN 12679:2000 | Non-destructive testing. Determination of the size of industrial radiographic sources. Radiographic method | |
| EN 12680-1:2003 | Founding. Ultrasonic examination. Steel castings for general purposes | |
| EN 12680-2:2003 | Founding. Ultrasonic examination. Steel castings for highly stressed components | |
| EN 12680-3:2003 | Founding. Ultrasonic examination. Spheroidal graphite cast iron castings | |
| EN 12681:2003 | Founding. Radiographic examination | |
| EN 12682:1998 | Biotechnology. Modified organisms for application in the environment. Guidance for the characterization | |
| EN 12683:1998 | Biotechnology. Modified organisms for application in the environment. Guidance for the characterization of the genetically modified organism | |
| EN 12685:1998 | Biotechnology. Modified organisms for application in the environment. Guidance for the monitoring strategies for deliberate release of genetically modified micro-organisms | |
| EN 12686:1998 | Biotechnology. Modified organisms for application in the environment. Guidance for the sampling strategies for deliberate releases of genetically modified micro-organisms | |
| EN 12687:1998 | Biotechnology. Modified organisms for application in the environment. Guidance for the characterization of the genetically modified organism by analysis of the genomic modification | |
| EN 12689:1998 | Biotechnology. Guidance on assessment of the purity, biological activity and stability of micro-organism based products | |
| EN 1269:1997 | Textile floor coverings. Assessment of impregnations in needled floor coverings by means of a soiling test | |
| EN 12690:1999 | Biotechnology. Performance criteria for shaft seals | |
| EN 12691:2001 | Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to impact | |
| EN 12696:2000 | Cathodic protection of steel in concrete | |
| EN 12697-1:2000 | Bituminous mixtures. Test methods for hot mix asphalt. Soluble binder content | |
| EN 12697-10:2002 | Bituminous mixtures. Test methods for hot mix asphalt. Compactibility | |
| EN 12697-11:2003 | Bituminous mixtures. Test methods for hot mix asphalt. Determination of the compatibility between aggregate and bitumen | |
| EN 12697-12:2003 | Bituminous mixtures. Test methods for hot mix asphalt. Determination of the water sensitivity of bituminous specimens | |
| EN 12697-13:2000 | Bituminous mixtures. Test methods for hot mix asphalt. Temperature measurement | |
| EN 12697-14:2000 | Bituminous mixtures. Test methods for hot mix asphalt. Water content | |
| EN 12697-15:2003 | Bituminous mixtures. Test methods for hot mix asphalt. Determination of the segregation sensitivity | |
| EN 12697-16:2004 | Bituminous mixtures. Test methods for hot mix asphalt. Abrasion by studded tyres | |
| EN 12697-17:2004 | Bituminous mixtures. Test methods for hot mix asphalt. Particle loss of porous asphalt specimen | |
| EN 12697-18:2004 | Bituminous mixtures. Test methods for hot mix asphalt. Binder drainage | |
| EN 12697-19:2004 | Bituminous mixtures. Test methods for hot mix asphalt. Permeability of specimen | |
| EN 12697-2:2002 | Bituminous mixtures. Test methods for hot mix asphalt. Determination of particle size distribution | |
| EN 12697-20:2003 | Bituminous mixtures. Test methods for hot mix asphalt. Indentation using cube or Marshall specimens | |
| EN 12697-21:2003 | Bituminous mixtures. Test methods for hot mix asphalt. Indentation using plate specimens | |
| EN 12697-22:2003 | Bituminous mixtures. Test methods for hot mix asphalt. Wheel tracking | |
| EN 12697-23:2003 | Bituminous mixtures. Test methods for hot mix asphalt. Determination of the indirect tensile strength of bituminous specimens | |
| EN 12697-24:2004 | Bituminous mixtures. Test methods for hot mix asphalt. Resistance to fatigue | |
| EN 12697-25:2005 | Bituminous mixtures. Test methods for hot mix asphalt. Cyclic compression test | |
| EN 12697-26:2004 | Bituminous mixtures. Test methods for hot mix asphalt. Stiffness | |
| EN 12697-27:2001 | Bituminous mixtures. Test methods for hot mix asphalt. Sampling | |
| EN 12697-28:2001 | Bituminous mixtures. Test methods for hot mix asphalt. Preparation of samples for determining binder content, water content and grading | |
| EN 12697-29:2002 | Bituminous mixtures. Test methods for hot mix asphalt. Determination of the dimensions of a bituminous specimen | |
| EN 12697-3:2005 | Bituminous mixtures. Test methods for hot mix asphalt. Bitumen recovery. Rotary evaporator | |
| EN 12697-30:2004 | Bituminous mixtures. Test methods for hot mix asphalt. Specimen preparation by impact compactor | |
| EN 12697-31:2004 | Bituminous mixtures. Test methods for hot mix asphalt. Specimen preparation gyratory compactor | |
| EN 12697-32:2003 | Bituminous mixtures. Test methods for hot mix asphalt. Laboratory compaction of bituminous mixtures by vibratory compactor | |
| EN 12697-33:2003 | Bituminous mixtures. Test methods for hot mix asphalt. Specimen prepared by roller compactor | |
| EN 12697-34:2004 | Bituminous mixtures. Test methods for hot mix asphalt. Marshall test | |
| EN 12697-35:2004 | Bituminous mixtures. Test methods for hot mix asphalt. Laboratory mixing | |
| EN 12697-36:2003 | Bituminous mixtures. Test methods for hot mix asphalt. Determination of the thickness of a bituminous pavement | |
| EN 12697-37:2003 | Bituminous mixtures. Test methods for hot mix asphalt. Hot sand test for the adhesivity of binder on precoated chippings for HRA | |
| EN 12697-38:2004 | Bituminous mixtures. Test methods for hot mix asphalt. Test equipment and calibration | |
| EN 12697-39:2004 | Bituminous mixtures. Test methods for hot mix asphalt. Binder content by ignition | |
| EN 12697-4:2005 | Bituminous mixtures. Test methods for hot mix asphalt. Bitumen recovery. Fractionating column | |
| EN 12697-5:2002 | Bituminous mixtures. Test methods for hot mix asphalt. Determination of the maximum density | |
| EN 12697-6:2003 | Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens | |
| EN 12697-7:2002 | Bituminous mixtures. Test methods for hot mix asphalt. Determination of the bulk density of bituminous specimens by gamma rays | |
| EN 12697-8:2003 | Bituminous mixtures. Test methods for hot mix asphalt. Determination of void characteristics of bituminous specimens | |
| EN 12697-9:2002 | Bituminous mixtures. Test methods for hot mix asphalt. Determination of the reference density | |
| EN 12699:2001 | Execution of special geotechnical work. Displacement piles | |
| EN 1270:1998 | Playing field equipment. Basketball equipment. Functional and safety requirements, test methods | |
| EN 12701:2001 | Structural adhesives. Storage. Determination of words and phrases relating to the product life of structural adhesives and related materials | |
| EN 12702:2000 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of blocking behaviour of potentially adhesive layers | |
| EN 12703:1999 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature | |
| EN 12704:2000 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of foam formation for aqueous adhesives | |
| EN 12705:2000 | Adhesives for leather and footwear materials. Determination of colour change of white or bright coloured leather surfaces by migration | |
| EN 12706:2000 | Adhesives. Test methods for hydraulic setting floor smoothing and/or levelling compounds. Determinatiion of flow characteristics | |
| EN 12707:2000 | Plastic drums. Non-removable head (tight head) drums with a nominal capacity of 210 l, 220 l and 225 l | |
| EN 12708:2000 | Plug/bung closure systems for plastics containers with a nominal capacity of 20 l to 225 l | |
| EN 12709:2000 | Plastic drums. Non-removable head (tight head) circular cross-section drums with a nominal capacity of 20 l to 120 l | |
| EN 1271:2004 | Playing field equipment. Volleyball equipment. Functional and safety requirements, test methods | |
| EN 12710:2000 | Fibreboard drums. Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l | |
| EN 12711:2000 | Steel drums. Non-removable head (tight head) drums with a minimum total capacity of 230 l | |
| EN 12712:2000 | Plastics jerricans. Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm, 1000 mm x 1200 mm and 1140 mm x 1140 mm | |
| EN 12713:2000 | Screw cap closure systems for plastics containers with a nominal capacity of 20 L to 60 L | |
| EN 12714:2000 | Plastics drums. Removable head (open head) drums with a nominal capacity of 25 L to 220 L | |
| EN 12715:2000 | Execution of special geotechnical work. Grouting | |
| EN 12716:2001 | Execution of special geotechnical works. Jet grouting | |
| EN 12717:2001 | Safety of machine tools. Drilling machines | |
| EN 1272:1998 | Child care articles. Table mounted chairs. Safety requirements and test methods | |
| EN 12720:1997 | Furniture. Assessment of surface resistance to cold liquids | |
| EN 12721:1997 | Furniture. Assessment of surface resistance to wet heat | |
| EN 12722:1997 | Furniture. Assessment of surface resistance to dry heat | |
| EN 12723:2000 | Liquid pumps. General terms for pumps and installations. Definitions, quantities, letter symbols and units | |
| EN 12726:2000 | Packaging. Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules | |
| EN 12727:2000 | Furniture. Ranked seating. Test methods and requirements for strength and durability | |
| EN 12728:2000 | Surface active agents. Determination of foaming power. Perforated disc beating method | |
| EN 12729:2002 | Devices to prevent pollution by backflow of potable water. Controllable backflow preventer with reduced pressure zone. Family B. Type A | |
| EN 1273:2005 | Child use and care articles. Baby walking frames. Safety requirements and test methods | |
| EN 12730:2001 | Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to static loading | |
| EN 12732:2000 | Gas supply systems. Welding steel pipework. Functional requirements | |
| EN 12733:2001 | Agricultural and forestry machinery. Pedestrian controlled motor mowers. Safety | |
| EN 12734:2000 | Irrigation techniques. Quick coupling pipes for movable irrigation supply. Technical characteristics and testing | |
| EN 12735-1:2001 | Copper and copper alloys. Seamless, round copper tubes for air conditioning and refrigeration. Tubes for piping systems | |
| EN 12735-2:2001 | Copper and copper alloys. Seamless, round copper tubes for air conditioning and refrigeration. Tubes for equipment | |
| EN 12736:2001 | Electrically propelled road vehicles. Airborne acoustical noise of vehicle during charging with on-board chargers. Determination of sound power level | |
| EN 12737:2004 | Precast Concrete Products. Floor Slats for Livestock | |
| EN 12738:1999 | Biotechnology. Laboratories for research, development and analysis. Guidance for containment of animals inoculated with microorganisms in experiments | |
| EN 1274:2004 | Thermal spraying. Powders. Composition, technical supply conditions | |
| EN 12740:1999 | Biotechnology. Laboratories for research, development and analysis. Guidance for handling, inactivating and testing of waste | |
| EN 12741:1999 | Biotechnology. Laboratories for research, development and analysis. Guidance for biotechnology laboratory operations | |
| EN 12742:1999 | Fruit and vegetable juices. Determination of free amino acids content. Liquid chromatographic method | |
| EN 12743:1999 | Footwear. Test methods for outsoles. Compression energy | |
| EN 12744:1999 | Footwear. Test methods for insoles. Delamination resistance | |
| EN 12745:1999 | Footwear. Test methods for insoles. Pin holding strength | |
| EN 12746:2000 | Footwear. Test methods for insoles and insocks. Water absorption and desorption | |
| EN 12747:1999 | Footwear. Test methods for insoles. Abrasion resistance |
| EN 12748:1999 | Footwear. Test methods for outsoles, insoles, linings and insocks. Water soluble content |
| EN 12749:1999 | Footwear. Ageing conditioning |
| EN 1275:1997 | Chemical disinfectants and antiseptics. Basic fungicidal activity. Test method and requirements (phase 1) |
| EN 12750:2001 | Safety of woodworking machines. Four-sided moulding machines |
| EN 12751:1999 | Textiles. Sampling of fibres, yarns and fabrics for testing |
| EN 12752-1:1999 | Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW. Safety |
| EN 12752-2:1999 | Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW. Rational use of energy |
| EN 12753:2005 | Thermal cleaning systems for exhaust gas from surface treatment equipment. Safety requirements |
| EN 12754:2002 | Transportable gas cylinders. Cylinders for dissolved acetylene. Inspection at time of filling |
| EN 12755:2000 | Transportable gas cylinders. Filling conditions for acetylene bundles |
| EN 12756:2001 | Mechanical seals. Principal dimensions, designation and material codes |
| EN 12758:2002 | Glass in building. Glazing and airborne sound insulation. Product descriptions and determination of properties |
| EN 12759:2001 | Rubber- or plastic-coated fabrics. Determination of resistance to liquids |
| EN 1276:1997 | Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics |
| EN 12760:1999 | Valves. Socket welding ends for steel valves |
| EN 12761-1:2001 | Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. General |
| EN 12761-2:2001 | Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. Field crop sprayers |
| EN 12761-3:2001 | Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. Air-assisted sprayers for bush and tree crops |
| EN 12763:2000 | Fibre-cement pipes and fittings for discharge systems for buildings. Dimensions and technical terms of delivery |
| EN 12764:2004 | Sanitary appliances. Specification for whirlpool baths |
| EN 12765:2001 | Classification of thermosetting wood adhesives for non-structural applications |
| EN 12766-1:2000 | Methods of test for petroleum and its products. Petroleum products and used oils. Determination of PCBs and related products. |
| EN 12766-2:2001 | Methods of test for petroleum and its products. Petroleum products and used oils. Determination of PCBs and related products. |
| EN 12766-3:2004 | Petroleum products and used oils. Determination of PCBs and related products. |
| EN 12767:2000 | Passive safety of support structures for road equipment. Requirements and test methods |
| EN 1277:2003 | Plastics piping systems. Thermoplastics piping systems for buried non-pressure applications. |
| EN 12770:2000 | Footwear. Test methods for outsoles. Abrasion resistance |
| EN 12771:2000 | Footwear. Test methods for outsoles. Tear strength |
| EN 12772:2000 | Footwear. Test methods for outsoles. Dimensional stability |
| EN 12773:2000 | Footwear. Test methods for outsoles. Needle tear strength |
| EN 12774:2000 | Footwear. Test methods for outsoles. Determination of split tear strength and delamination resistance |
| EN 12775:2001 | Solid wood panels. Classification and terminology |
| EN 12778:2002 | Cookware. Pressure cookers for domestic use |
| EN 12779:2004 | Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety related performances and safety requirements |
| EN 1278:1999 | Chemicals used for treatment of water intended for human consumption. Ozone |
| EN 12780:2002 | Water quality. Detection and enumeration of Pseudomonas aeruginosa by membrane filtration |
| EN 12781:2001 | Wallcoverings. Specification for cork panels |
| EN 12782:2000 | Footwear. Test methods for insoles. Resistance to stitch tear |
| EN 12784:2000 | Footwear. Test methods for the whole shoe. Thermal insulation |
| EN 12785:2000 | Footwear. Test methods for whole shoe. Heel attachment |
| EN 12786:1999 | Safety of machinery. Guidance for the drafting of vibration clauses of safety standards |
| EN 12789:2002 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure. Determination of flexural strength |
| EN 12790:2002 | Child care articles. Reclined cradles |
| EN 1279-1:2004 | Glass in building. Insulating glass units. Generalities, dimensional tolerances and rules for the system description |
| EN 1279-2:2002 | Glass in building. Insulating glass units. Long term test method and requirements for moisture penetration |
| EN 12792:2003 | Ventilation for buildings. Symbols, terminology and graphical symbols |
| EN 1279-3:2002 | Glass in building. Insulating glass units. Long term test method and requirements for gas leakage rate and for gas concentration tolerances |
| EN 1279-4:2002 | Glass in building. Insulating glass units. Methods of test for the physical attributes of edge seals |
| EN 12794:2005 | Precast concrete products. Foundation piles |
| EN 12795:2003 | Road transport and traffic telematics. Dedicated short range communication (DSRC). DSRC data link layer. Medium access and logical link control |
| EN 1279-6:2002 | Glass in building. Insulating glass units. Factory production control and periodic tests |
| EN 12797:2000 | Brazing. Destructive tests of brazed joints |
| EN 12798:1999 | Transport quality system. Road, rail and inland navigation transport. Quality system requirements to supplement BS EN ISO 9002 for the transport of dangerous goods with regard to safety |
| EN 12799:2000 | Brazing. Non-destructive examination of brazed joints |
| EN 12800:2000 | Footwear. Test methods for insoles. Dimensional stability |
| EN 1280-1:1997 | Agent specific filling systems for anaesthetic vaporizers. Rectangular keyed filling systems |
| EN 12801:2000 | Footwear. Test methods for insoles, lining and insocks. Perspiration resistance |
| EN 12802:2000 | Road marking materials. Laboratory methods for identification |
| EN 12803:2000 | Footwear. Test methods for outsoles. Tensile strength and elongation |
| EN 12805:2002 | Automotive LPG components. Containers |
| EN 12806:2003 | Automotive liquefied petroleum gas components. Other than containers |
| EN 12807:2001 | Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG). Design and construction |
| EN 12808-1:1999 | Adhesives and grouts for tiles. Determination of chemical resistance of reaction resin mortars |
| EN 12808-2:2002 | Adhesives and grouts for tiles. Determination of resistance to abrasion |
| EN 12808-3:2002 | Adhesives and grouts for tiles. Determination of flexural and compressive strength |
| EN 12808-4:2002 | Adhesives and grouts for tiles. Determination of shrinkage |
| EN 12808-5:2002 | Adhesives and grouts for tiles. Determination of water absorption |
| EN 12809:2001 | Residential independent boilers fired by solid fuel. Nominal heat output up to 50 kW. Requirements and test methods |
| EN 12810-1:2003 | Facade scaffolds made of prefabricated components. Product specifications |
| EN 12810-2:2003 | Facade scaffolds made of prefabricated components. Particular methods of structural design |
| EN 12811-1:2003 | Temporary works equipment. Scaffolds. Performance requirements and general design |
| EN 12811-2:2004 | Temporary works equipment. Information on materials |
| EN 12811-3:2002 | Temporary works equipment. Load testing |
| EN 1281-2:1996 | Anaesthetic and respiratory equipment. Conical connectors. Screw-threaded, weight-bearing connectors |
| EN 12812:2004 | Falsework. Performance requirements and general design |
| EN 12813:2004 | Temporary works equipment. Load bearing towers of prefabricated components. Particular methods of structural design |
| EN 12814-1:2000 | Testing of welded joints of thermoplastics semi-finished products. Bend test |
| EN 12814-2:2000 | Testing of welded joints of thermoplastics semi-finished products. Tensile test |
| EN 12814-3:2000 | Testing of welded joints of thermoplastics semi-finished products. Tensile creep test |
| EN 12814-4:2001 | Testing of welded joints of thermoplastics semi-finished products. Peel test |
| EN 12814-5:2000 | Testing of welded joints of thermoplastics semi-finished products. Macroscopic examination |
| EN 12814-6:2000 | Testing of welded joints of thermoplastics semi-finished products. Low temperature tensile test |
| EN 12814-7:2002 | Testing of welded joints of thermoplastics semi-finished products. Tensile test with waisted test specimens |
| EN 12814-8:2001 | Testing of welded joints of thermoplastic semi-finished products -. Requirements |
| EN 12815:2001 | Residential cookers fired by solid fuel. Requirements and test methods |
| EN 12816:2001 | Transportable refillable steel and aluminium LPG cylinders. Disposal |
| EN 12817:2002 | Inspection and requalification of LPG tanks up to and including 13 m$u3 overground |
| EN 12818:2002 | Inspection and requalification of LPG tanks up to and including 13 m$u3 underground |
| EN 12819:2002 | Inspection and requalification of LPG tanks greater than 13 m$u3 overground |
| EN 12820:2002 | Inspection and requalification of LPG tanks greater than 13 m$u3 underground |
| EN 12821:2000 | Foodstuffs. Determination of vitamin D by high perfomance liquid chromatography. Measurement of cholecalciferol (D$d3) and ergocalciferol (D$d2) |
| EN 1282-2:1997 | Anaesthetic and respiratory equipment. Tracheostomy tubes. Paediatric tubes |
| EN 12822:2000 | Foodstuffs. Determination of vitamin E by high performance liquid chromatography. Measurement of $Ga-, $Gb-, $Gg- and $Gd-tocopherols |
| EN 12823-1:2000 | Foodstuffs. Determination of vitamin A by high performance liquid chromatography. Measurement of all-trans-retinol and 13-cis-retinol |
| EN 12823-2:2000 | Foodstuffs. Determination of vitamin A by high performance liquid chromatography. Measurement of $Gb-carotene |
| EN 12825:2001 | Raised access floors |
| EN 12826:2000 | Footwear. Test methods for lining and insocks. Static friction |
| EN 12827:1999 | Inland navigation vessels. Connections for the transfer of diesel oil |
| EN 12828:2003 | Heating systems in buildings. Design for water-based heating systems |
| EN 12829:1998 | Surface active agents. Preparation of water with known calcium hardness |
| EN 1283:1996 | Haemodialysers, haemodiafilters, haemofilters, haemoconcentrators and their extracorporeal circuits |
| EN 12830:1999 | Temperature recorders for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream. Tests, performance and suitability |
| EN 12831:2003 | Heating systems in buildings. Method for calculation of the design heat load |
| EN 12832:1999 | Characterisation of sludges. Utilisation and disposal of sludges. Vocabulary |
| EN 12833:2001 | Skylight and conservatory roller shutters. Resistance to snow load. Test method |
| EN 12834:2003 | Road transport and traffic telematics. Dedicated Short Range Communication (DSRC). DSRC application layer |
| EN 12835:2001 | Airtight shutters. Air permeability test |
| EN 12836:2002 | Surface active agents. Determination of the water number of alkoxylated products |
| EN 12838:2000 | Installations and equipment for liquefied natural gas. Suitability testing of LNG sampling systems |
| EN 12839:2001 | Precast concrete products. Elements for fences |
| EN 12840:2001 | Safety of machine tools. Manually controlled turning machines with or without automatic control |
| EN 12842:2000 | Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods |
| EN 12843:2004 | Precast concrete products. Masts and poles |
| EN 12844:1999 | Zinc and zinc alloys. Castings. Specifications |
| EN 12845:2004 | Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance |
| EN 12846:2002 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of efflux time of bitumen emulsions by the efflux viscometer method |
| EN 12847:2002 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of settling tendency of bitumen emulsions |
| EN 12848:2002 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of mixing stability with cement of bitumen emulsions |
| EN 12849:2002 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of penetration power of bitumen emulsions |
| EN 12850:2002 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the pH value of bitumen emulsions |
| EN 12852:2001 | Food processing machinery. Food processors and blenders. Safety and hygiene requirements |
| EN 12853:2001 | Food processing machinery. Hand-held blenders and whisks. Safety and hygiene requirements |
| EN 12854:2003 | Food processing machinery. Beam mixers. Safety and hygiene requirements |
| EN 12855:2003 | Food processing machinery. Rotating bowl cutters. Safety and hygiene requirements |
| EN 12856:1999 | Foodstuffs. Determination of acesulfame-K, aspartame and saccharin. High performance liquid chromatographic method |
| EN 12857:1999 | Foodstuffs. Determination of cyclamate. High performance liquid chromatographic method |
| EN 12858:1999 | Paper. Printing and business paper. Requirements for continuous stationery |
| EN 12859:2001 | Gypsum blocks. Definitions, requirements and test methods |
| EN 1286:1999 | Sanitary tapware. Low pressure mechanical mixing valves. General technical specification |
| EN 12860:2001 | Gypsum based adhesives for gypsum blocks. Definitions, requirements and test methods |
| EN 12861:1999 | Copper and copper alloys. Scrap |
| EN 12862:2000 | Transportable gas cylinders. Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders |
| EN 12863:2002 | Transportable gas cylinders. Periodic inspection and maintenance of dissolved acetylene cylinders |
| EN 12864:2001 | Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar |
| EN 12865:2001 | Hygrothermal performance of building components and building elements. Determination of the resistance of external wall systems to driving rain under pulsating air pressure |
| EN 12868:1999 | Child use and care articles. Methodes for determining the release of N-nitrosamines and N-nitrosatable substances from elastomer or rubber teats and soothers |
| EN 1287:1999 | Sanitary tapware. Low pressure thermostatic mixing valves. General technical specifications |
| EN 12871:2001 | Wood-based panels. Performance specifications and requirements for load bearing boards for use in floors, walls and roofs |
| EN 12873-1:2003 | Influence of materials on water intended for human consumption. Influence due to migration. Test method for non-metallic and non-cementitious factory made products |
| EN 12873-2:2005 | Influence of materials on water intended for human consumption. Influence due to migration. Test method for non-metallic and non-cementitious site-applied materials |
| EN 12874:2001 | Flame arresters. Performance requirements, test methods and limits for use |
| EN 12875-2:2002 | Mechanical dishwashing resistance of domestic utensils. Inspection of non-metallic articles |
| EN 12876:2000 | Chemicals used for treatment of water intended for human consumption. Oxygen |
| EN 12877-1:2000 | Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics. General introduction |
| EN 12877-2:2000 | Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics. Determination by injection moulding |
| EN 12877-3:2000 | Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics. Determination by oven test |
| EN 12877-4:2000 | Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics. Determination by two-roll milling |
| EN 12878:2005 | Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test |
| EN 12879:2000 | Characterization of sludges. Determination of the loss of ignition of dry mass |
| EN 12880:2000 | Characterization of sludges. Determination of dry residue and water content |
| EN 1288-1:2000 | Glass in building. Determination of the bending strength of glass. Fundamentals of testing glass |
| EN 1288-2:2000 | Glass in building. Determination of the bending strength of glass. Coaxial double ring test on flat specimens with large test surface areas |
| EN 12882:2002 | Conveyor belts for general purpose use. Electrical and flammability safety requirements |
| EN 12883:2000 | Founding. Equipment for the production of lost patterns for the lost wax casting process |
| EN 1288-3:2000 | Glass in building. Determination of the bending strength of glass. Test with specimen supported at two points (four point bending) |
| EN 12884:1999 | Biotechnology. Performance criteria for centrifuges |
| EN 1288-4:2000 | Glass in building. Determination of the bending strength of glass. Testing of channel shaped glass |
| EN 12885:1999 | Biotechnology. Performance criteria for cell disrupters |
| EN 1288-5:2000 | Glass in building. Determination of the bending strength of glass. Coaxial double ring test on flat specimens with small test surface areas |
| EN 12889:2000 | Trenchless construction and testing of drains and sewers |
| EN 1289:1998 | Non-destructive examination of welds. Penetrant testing of welds. Acceptance levels |
| EN 12890:2000 | Founding. Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores |
| EN 12892:2000 | Founding. Equipment for the production of lost patterns for the lost foam casting process |
| EN 12893:2000 | Copper and copper alloys. Determination of spiral elongation number |
| EN 12895:2000 | Industrial trucks. Electromagnetic compability |
| EN 12898:2001 | Glass in building. Determination of the emissivity |
| EN 12899-1:2001 | Fixed, vertical road traffic signs. Fixed signs |
| EN 1290:1998 | Non-destructive examination of welds. Magnetic particle examination of welds |
| EN 12900:1999 | Refrigerant compressors. Rating conditions, tolerances and presentation of manufacturer's performance data |
| EN 129000:1996 | Harmonized system of quality assessment for electronic components. Generic specification. Fixed RF wound inductors |
| EN 12901:1999 | Products used for treatment of water intended for human consumption. Inorganic supporting and filtering materials. Definitions |
| EN 12902:2004 | Products used for treatment of water intended for human consumption. Inorganic supporting and filtering materials. Methods of test |
| EN 12903:2003 | Products used for the treatment of water intended for human consumption. Powdered activated carbon |
| EN 12904:2005 | Products used for treatment of water intended for human consumption. Silica sand and silica gravel |
| EN 12905:1999 | Products used for treatment of water intended for human consumption. Expanded aluminosilicate |
| EN 12906:1999 | Products used for treatment of water intended for human consumption. Pumice |
| EN 12907:2003 | Products used for the treatment of water intended for human consumption. Pyrolyzed coal material |
| EN 12909:1999 | Products used for treatment of water intended for human consumption. Anthracite |
| EN 1291:1998 | Non-destructive testing of welds. Magnetic particle testing of welds. Acceptance levels |
| EN 12910:1999 | Products used for treatment of water intended for human consumption. Garnet |
| EN 129100:1995 | Harmonized system of quality assessment for electronic components. Sectional specification: wirewound surface mounting inductors |
| EN 129101:1995 | Harmonized system of quality assessment for electronic components. Blank detail specification: wirewound surface mounting inductors of assessed quality. Assessment level E |
| EN 129102:1995 | Specification for harmonized system of quality assessment for electronic components. Blank detail specification: wirewound surface mounting inductors of assessed quality. |
| EN 12911:1999 | Products used for treatment of water intended for human consumption. Manganese greensand |
| EN 12912:1999 | Products used for treatment of water intended for human consumption. Barite |
| EN 12913:1999 | Products used for treatment of water intended for human consumption. Powdered diatomaceous earth |
| EN 12914:1999 | Products used for treatment of water intended for human consumption. Powdered perlite |
| EN 12915-1:2003 | Products used for the treatment of water intended for human consumption. Granular activated carbon. Virgin granular activated carbon |
| EN 12915-2:2003 | Products used for the treatment of water intended for human consumption. Granular activated carbon. Reactivated granular activated carbon |
| EN 12916:2000 | Methods of test for petroleum and its products. Petroleum products. Determination of aromatic hydrocarbon in middle distillates. |
| EN 12918:1999 | Water quality. Determination of parathion, parathion-methyl and some other organophosphorus compounds in water by dichloromethane extraction and gas chromatographic analysis |
| EN 12919:1999 | Workplace atmospheres. Pumps for the sampling of chemical agents with a volume flow rate of over 51/min. Requirements and test methods |
| EN 129200:1996 | Harmonized system of quality assessment for electronic components. Sectional specification: fixed inductors with ceramic or ferrite core wound with copper wire for RF circuits |
| EN 129201:1995 | Specification for harmonized system of quality assessment for electronic components. Blank detail specification: wirewound inductors with ceramic or ferrite core. Assessment level E |
| EN 129202:1995 | Specification for harmonized system of quality assessment for electronic components. Blank detail specification: wirebound inductors with ceramic or ferrite core. Assessment level P |
| EN 12921-3:2005 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours. Safety of machines using flammable cleaning liquids |
| EN 12926:2000 | Chemicals used for treatment of water intended for human consumption. Sodium peroxodisulfate |
| EN 12927-1:2004 | Safety requirements for cableways installation designed to carry persons. Ropes. Selection criteria for ropes and their end fixing |
| EN 12927-2:2004 | Safety requirements for cableway installations designed to carry persons. Ropes. Safety factors |
| EN 12927-3:2004 | Safety requirements for cableways installation designed to carry persons. Ropes. Long splicing of 6 strand hauling, carrying hauling and towing ropes |
| EN 12927-4:2004 | Safety requirements for cableway installations designed to carry person. Ropes. End fixings |
| EN 12927-5:2004 | Safety requirements for cableway installations designed to carry person. Ropes. Storage, transportation, installation and tensioning |
| EN 12927-6:2004 | Safety requirements for cableway installations designed to carry persons. Ropes. Discard criteria |
| EN 12927-7:2004 | Safety requirments for cableways installations designed to carry persons. Ropes. Inspection, repair and maintenance |
| EN 12927-8:2004 | Safety requirements for cableways installation designed to carry persons. Ropes. Magnetic rope testing (MRT) |
| EN 12928:2000 | Inserted flange type closure systems for steel drums with a total capacity of 17 l to 230 l |
| EN 12929-1:2004 | Safety requirements for cableways installation designed to carry persons. General requirements. Requirements for all installations |
| EN 12929-2:2004 | Safety requirments for cableways installations designed to carry persons. General requirements. Additional reqirments for reversible bicable aerial ropeways without carrier truck brakes |
| EN 1293:1999 | General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers |
| EN 12930:2004 | Safety requirements for cableway installations designed to carry persons. Calculations |
| EN 12931:2000 | Chemicals used for treatment of water intended for human consumption. Chemicals for emergency use. Sodium dichloroisocyanurate, anhydrous |
| EN 12932:2000 | Chemicals used for treatment of water intended for human consumption. Chemicals for emergency use. Sodium dichloroisocyanurate, dihydrate |
| EN 12933:2000 | Chemicals used for treatment of water intended for human consumption. Chemicals for emergency use. Trichloroisocyanuric acid |
| EN 12934:2000 | Feather and down. Composition labelling of processed feathers and down for use as sole filling material |
| EN 12935:2001 | Feather and down. Hygiene and cleanliness requirements |
| EN 12938:2000 | Methods for the analysis of pewter. Determination of alloying and impurity element contents by atomic spectrometry |
| EN 12939:2001 | Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods. |
| EN 1294:2000 | Door leaves. Determination of the behaviour under humidity variations in successive uniform climates |
| EN 12940:2004 | Footwear manufacturing wastes. Waste classification and management |
| EN 12941:1999 | Respiratory protective devices. Powered filtering devices incorporating a helmet or a hood. Requirements, testing, marking |
| EN 12942:1999 | Respiratory protective devices. Power assisted filtering devices incorporating full face masks, half masks or quarter masks. Requirements, testing, marking |
| EN 12943:2000 | Filler materials for thermoplastics. Scope, designation, requirements, tests |
| EN 12944-1:2000 | Fertilizers and liming materials. Vocabulary. General terms |
| EN 12944-2:2000 | Fertilizers and liming materials. Vocabulary. Terms relating to fertilizers |
| EN 12944-3:2002 | Fertilizers and liming materials. Vocabulary. Terms relating to liming materials |
| EN 12945:2002 | Liming materials. Determination of neutralizing value. Titrimetric methods |
| EN 12946:2000 | Liming materials. Determination of calcium content and magnesium content. Complexometric method |
| EN 12947:2000 | Liming materials. Determination of magnesium content. Atomic absorption spectrometric method |
| EN 12948:2002 | Liming materials. Determination of size distribution by dry and wet sieving |
| EN 1295-1:1998 | Structural design of buried pipelines under various conditions of loading. General requirements |
| EN 12952-1:2001 | Water-tube boilers and auxiliary installations. General |
| EN 12952-10:2002 | Water-tube boilers and auxiliary installations. Requirements for safeguards against excessive pressure |
| EN 12952-12:2003 | Water-tube boilers and auxiliary installations. Requirements for boiler feedwater and boiler water quality |
| EN 12952-13:2003 | Water-tube boilers and auxiliary installations. Part 13:Requirements for flue gas cleaning systems |
| EN 12952-14:2004 | Water-tube boilers and auxiliary installations. Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution |
| EN 12952-15:2003 | Water-tube boilers and auxiliary installations. Acceptance tests |
| EN 12952-16:2002 | Water-tube boilers and auxiliary installations. Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler |
| EN 12952-2:2001 | Water-tube boilers and auxiliary installations. Materials for pressure parts of boilers and accessories |
| EN 12952-3:2001 | Water-tube boilers and auxiliary installations. Design and calculation of pressure parts |
| EN 12952-4:2000 | Water-tube boilers and auxiliary installations. In-service boiler life expectancy calculations |
| EN 12952-5:2001 | Water-tube boilers and auxiliary installations. Workmanship and construction of pressure parts of the boiler |
| EN 12952-6:2002 | Water-tube boilers and auxiliary installations. Inspection during construction, documentation and marking of pressure parts of the boiler |
| EN 12952-7:2002 | Water-tube boilers and auxiliary installations. Requirements for equipment for the boiler |
| EN 12952-8:2002 | Water-tube boilers and auxiliary installations. Requirements for firing systems for liquid and gaseous fuels for the boiler |
| EN 12952-9:2002 | Water-tube boilers and auxiliary installations. Requirements for firing systems for pulverized solid fuels for the boiler |
| EN 12953-1:2002 | Shell boilers. General |
| EN 12953-10:2003 | Shell boilers. Requirements for feedwater and boiler water quality |
| EN 12953-11:2003 | Shell boilers. Acceptance tests |
| EN 12953-12:2003 | Shell boilers. Requirements for grate firing systems for solid fuels for the boiler |
| EN 12953-2:2002 | Shell boilers. Materials for pressure parts of boilers and accessories |
| EN 12953-3:2002 | Shell boilers. Design and calculation for pressure parts |
| EN 12953-4:2002 | Shell boilers. Workmanship and construction of pressure parts of the boiler |
| EN 12953-5:2002 | Shell boilers. Inspection during construction, documentation and marking of pressure parts of the boiler |
| EN 12953-6:2002 | Shell boilers. Requirements for equipment for the boiler |
| EN 12953-7:2002 | Shell boilers. Requirements for firing systems for liquid and gaseous fuels for the boilers |
| EN 12953-8:2001 | Shell boilers. Requirements for safeguards against excessive pressure |
| EN 12954:2001 | Cathodic protection of buried or immersed metallic structures. General principles and application for pipelines |
| EN 12955:1999 | Foodstuffs. Determination of aflatoxin B$d1, and the sum of aflatoxins B$d1, B$d2, G$d1 and G$d2 in cereals, shell-fruits and derived products. |
| EN 12956:1999 | Wallcoverings in roll form. Determination of dimensions, straightness, spongeability and washability |
| EN 12957:2001 | Machine tools. Safety. Electro discharge machines |
| EN 12958:2000 | Footwear. Test methods for shanks. Fatigue resistance |
| EN 12959:2000 | Footwear. Test methods for shanks. Longitudinal stiffness |
| EN 1296:2001 | Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roofing. Method of artificial ageing by long term exposure to elevated temperature |
| EN 12960:2001 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of shear resistance |
| EN 12961:2001 | Adhesives for leather and footwear materials. Determination of optimum activation temperatures and maximum activation life of solvent-based and dispersion adhesives |
| EN 12962:2001 | Adhesives. Determination of elastic behaviour of liquid adhesives (elasticity index) |
| EN 12963:2001 | Adhesives. Determination of free monomer content in adhesives based on synthetic polymers |
| EN 12964:2001 | Adhesives for leather and footwear materials. Lasting adhesives. Testing heat resistance of bonds at increasing temperature |
| EN 12965:2003 | Tractors and machinery for agriculture and forestry. Power take-off (PTO) drive shafts and their guards. Safety |
| EN 12966-1:2005 | Road vertical signs. Variable message traffic signs. Product standard |
| EN 12966-2:2005 | Road vertical signs. Variable message traffic signs. Initial type testing |
| EN 12966-3:2005 | Road vertical signs. Variable message traffic signs. Factory production control |
| EN 12970:2000 | Mastic asphalt for waterproofing. Definitions, requirements and test methods |
| EN 12971-1:1999 | Reinforcements. Specification for textile glass chopped strands. Designation |
| EN 12971-2:1999 | Reinforcements. Specification for textile glass chopped strands. Test methods and general requirements |
| EN 12971-3:1999 | Reinforcements. Specification for textile glass chopped strands. Specific requirements |
| EN 12972:2001 | Tanks for transport of dangerous goods. Testing, inspection and marking of metallic tanks |
| EN 12973:2000 | Value Management |
| EN 12974:2000 | Surface active agents. Determination of the 1,4-dioxane content in alkyl-ethoxy-sulfate products by GLC/head space procedure |
| EN 12975-1:2000 | Thermal solar systems and components. Solar collectors. General requirements |
| EN 12975-2:2001 | Thermal solar systems and components. Solar collectors. Test methods |
| EN 12976-1:2001 | Thermal solar systems and components. Factory made systems. General requirements |
| EN 12976-2:2001 | Thermal solar systems and components. Factory made systems. Test methods |
| EN 12978:2003 | Industrial, commercial and garage doors and gates. Safety devices for power operated doors and gates. Requirements and test methods |
| EN 12979:2002 | Automotive LPG systems. Installation requirements |
| EN 1298:1996 | Mobile access and working towers. Rules and guidelines for the preparation of an instruction manual |
| EN 12980:2000 | Materials and articles in contact with foodstuffs. Non-metallic articles for catering and industrial use. Method of test for the determination of impact resistance |
| EN 12981:2005 | Coating plants. Spray booths for application of organic powder coating material. Safety requirements |
| EN 12982:2000 | Industrial valves. End-to-end and centre-to-end dimensions for butt welding end valves |
| EN 12983-1:2000 | Cookware. Domestic cookware for use on top of a stove, cooker or hob. General requirements |
| EN 1299:1997 | Mechanical vibration and shock. Vibration isolation of machines. Information for the application of source isolation |
| EN 12999:2002 | Cranes. Loader cranes |
| EN 1300:2004 | Secure storage units. Classification for high security locks according to their resistance to unauthorized opening |
| EN 13001-1:2004 | Crane safety. General design. General principles and requirements |
| EN 13001-2:2004 | Crane safety. General design. Load effects |
| EN 13002-2:1999 | Carbon fibre yarns. Test methods and general specifications |
| EN 13003-1:1999 | Para-aramid fibre filament yarns. Designation |
| EN 13003-2:1999 | Para-aramid fibre filament yarns. Methods of test and general specifications |
| EN 13003-3:1999 | Para-aramid fibre filament yarns. Technical specifications |
| EN 13007:2000 | Steel drums. Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l |
| EN 13008:2000 | Steel drums. Removable head (open head) drums with a nominal capacity of 15 l to 62 l |
| EN 13009:2000 | Hygrothermal performance of building materials and products. Determination of hygric expansion coefficient |
| EN 13010:2003 | Packaging. Unit packaging. Dimensions and requirements for pegboard display |
| EN 130100:1998 | Harmonized system of quality assessment for electronic components. Sectional specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current |
| EN 130101:1998 | Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current. |
| EN 130102:1998 | Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current. |
| EN 1301-1:1997 | Aluminium and aluminium alloys. Drawn wire. Technical conditions for inspection and delivery |
| EN 13011:2001 | Transport services. Goods transport chains. System for declaration of performance conditions |
| EN 1301-2:1997 | Aluminium and aluminium alloys. Drawn wire. Mechanical properties |
| EN 13012:2001 | Petrol filling stations. Construction and performance of automatic nozzles for use on fuel dispensers |
| EN 1301-3:1997 | Aluminium and aluminium alloys. Drawn wire. Tolerances on dimensions |
| EN 13014:2000 | Connections for gas sampling tubes to anaesthetic and respiratory equipment |
| EN 13015:2001 | Maintenance for lifts and escalators. Rules for maintenance instructions |
| EN 13016-1:2000 | Liquid petroleum products. Vapour pressure. Determination of air saturated vapour pressure (ASVP) |
| EN 13016-2:2000 | Liquid petroleum products. Vapour pressure. Determination of absolute vapour pressure (AVP) between 40 $0DC and 100 $0DC |
| EN 13017-1:2001 | Solid wood panels. Classification by surface appearance. Solid wood panels. Classification by surface appearance. Softwood |
| EN 13017-2:2001 | Solid wood panels. Classification by surface appearance. Hardwood |
| EN 13018:2001 | Non-destructive testing. Visual testing. General principles |
| EN 13019:2001 | Machines for road surface cleaning. Safety requirements |
| EN 1302:1999 | Chemicals used for treatment of water intended for human consumption. Aluminium-based coagulants. Analytical methods |
| EN 13020:2004 | Road surface treatment machines. Safety requirements |
| EN 130200:1993 | Harmonized system of quality assessment for electronic components. Sectional specification: fixed tantalum capacitors with non-solid or solid electrolyte |
| EN 130201:1995 | Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed tantalum capacitors with solid electrolyte, porous anode (sub-family 3) |
| EN 130202:1998 | Harmonized system of quality assessment for electronic components. Blank detail specification: fixed tantalum capacitors with non-solid electrolyte, porous anode (sub-family 2) |
| EN 13021:2003 | Winter service machines. Safety requirements |
| EN 13023:2003 | Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment. Accuracy grades 2 and 3 |
| EN 13024-1:2002 | Glass in building. Thermally toughened borosilicate safety glass. Definition and description |
| EN 13024-2:2004 | Glass in building. Thermally toughened borosilicate safety glass. Evaluation of conformity/Product standard |
| EN 13025:2000 | Packaging. Light gauge metal packaging. Nominal filling volumes for round cylindrical and tapered general use metal containers up to 40000 ml |
| EN 13026:2001 | Packaging. Light-gauge metal packaging. Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml |
| EN 13027:2001 | Packaging. Light-gauge metal packaging. Open-top round cans defined by their nominal gross-lidded capacity |
| EN 13028:2001 | Packaging. Light-gauge metal packaging. Round open-top cans for beverage products with or without added gas, defined by their nominal filling volumes |
| EN 13029:2001 | Packaging. Light-gauge metal packaging. Apertures for plug-in plastic closures |
| EN 1303:2005 | Building hardware. Cylinders for locks. Requirements and test methods |
| EN 13030:2001 | Ventilation for buildings. Terminals. Performance testing of louvres subjected to simulated rain |
| EN 130300:1998 | Harmonized system of quality assessment for electronic components. Sectional specification:aluminium electrolytic capacitors with solid and non-solid electrolyte |
| EN 130301:2002 | Harmonized system of quality assessment for electronic components. Blank Detail Specification. Aluminium electrolytic capacitors with non-solid electrolyte |
| EN 13031-1:2001 | Greenhouses. Design and construction. Commercial production greenhouses |
| EN 13032-1:2004 | Light and lighting. Measurement and presentation of photometric data of lamps and luminaires. Measurement and file format |
| EN 13032-2:2004 | Light and lighting. Measurement and presentation of photometric data of lamps and luminaires. Presentation of data for indoor and outdoor work places |
| EN 13034:2005 | Protective clothing against liquid chemicals. Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals |
| EN 13035-3:2003 | Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Cutting machines |
| EN 13035-4:2003 | Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Tilting tables |
| EN 13036-1:2002 | Road and airfield surface characteristics. Test methods. Measurement of pavement surface macrotexture depth using a volumetric patch technique |
| EN 13036-3:2002 | Road and airfield surface characteristics. Test methods. Measurement of pavement surface horizontal drainability |
| EN 13036-4:2003 | Road and airfield surface characteristics. Test methods. Method for measurement of slip/skid resistance of a surface. The pendulum test |
| EN 13036-7:2003 | Road and airfield surface characteristics. Test methods. Irregularity measurement of pavement courses. The straightedge test |
| EN 13037:2000 | Soil improvers and growing media. Determination of pH |
| EN 13038:2000 | Soil improvers and growing media. Determination of electrical conductivity |
| EN 13039:2000 | Soil improvers and growing media. Determination of organic matter content and ash |
| EN 1304:1998 | Clay roofing tiles for discontinuous laying. Products definitions and specifications |
| EN 13040:2000 | Soil improvers and growing media. Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density |
| EN 13041:2000 | Soil improvers and growing media. Determination of physical properties. Dry bulk density, air volume, water volume, shrinkage value and total pore space |
| EN 13042-2:2004 | Machines and plants for the manufacture, treatment and processing of hollow glass. Safety requirements. Handling machines for feeding |
| EN 13042-5:2003 | Machines and plants for the manufacture, treatment and processing of hollow glass. Safety requirements. Presses |
| EN 13043:2002 | Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas |
| EN 13044:2001 | Swap bodies. Coding, identification and marking |
| EN 13045:2000 | Packaging. Flexible cylindrical plastic tubes. Dimensions and tolerances |
| EN 13046:2000 | Packaging. Flexible cylindrical metallic tubes. Dimensions and tolerances |
| EN 13047:2000 | Packaging. Flexible conical metallic tubes. Dimensions and tolerances |
| EN 13048:2000 | Packaging. Flexible aluminium tubes. Internal lacquer film thickness measurement method |
| EN 13049:2003 | Windows. Soft and heavy body impact. Test method, safety requirements and classification |
| EN 1305:1996 | Inland navigation vessels. Connections for the discharge of oily mixture |
| EN 130500:1998 | Harmonized system of quality assessment for electronic components. Sectional specification: fixed metallized polycarbonate film dielectric capacitors for direct current |
| EN 130501:1998 | Harmonized system of quality assessment for electronic components. Blank detail specification: fixed metallized polycarbonate film dielectric capacitors for direct current. |
| EN 130502:1998 | Harmonized system of quality assessment for electronic components. Blank detail specification: fixed metallized polycarbonate film dielectric capacitors for direct current. |
| EN 13051:2001 | Curtain walling. Watertightness. Site test |
| EN 13052-1:2001 | Influence of materials on water intended for human consumption. Organic materials. Determination of colour and turbidity of water in piping systems. Test method |
| EN 13053:2001 | Ventilation for buildings. Air handling units. Ratings and performance for units, components and sections |
| EN 13054:2001 | Packaging. Complete, filled transport packages. Test methods for the determination of the centre of gravity of a package |
| EN 13055-1:2002 | Lightweight aggregates. Lightweight aggregates for concrete, mortar and grout |
| EN 13055-2:2004 | Lightweight aggregates. Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications |
| EN 13056:2000 | Inland navigation vessels. Stairs with inclination angles of 30 degrees to $0L 45 degrees. Requirements, types |
| EN 13057:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance of capillary absorption |
| EN 13059:2002 | Safety of industrial trucks. Test methods for measuring vibration |
| EN 1306:1996 | Inland navigation vessels. Connections for the discharge of waste water |
| EN 13061:2001 | Protective clothing. Shin guards for association football players. Requirements and test methods |
| EN 13062:2003 | Products and systems for the protection and repair of concrete structures. Test method. Determination of thixotropy of products for protection of reinforcement |
| EN 13067:2003 | Plastics welding personnel. Qualification testing of welders. Thermoplastics welded assemblies |
| EN 13068-1:2000 | Non-destructive testing. Radioscopic testing. Quantitative measurement of imaging properties |
| EN 13068-2:2000 | Non-destructive testing. Radioscopic testing. Check of long term stability of imaging devices |
| EN 13068-3:2001 | Non-destructive testing. Radioscopic testing. General principles of radioscopic testing of metallic materials by X- and gamma rays |
| EN 1307:1997 | Textile floor coverings. Classification of pile carpets |
| EN 13071:2002 | Selective waste collection containers. Above-ground mechanically-lifted containers with capacity from 80 l to 5000 l for selective collection of waste |
| EN 13073:2001 | Footwear. Test methods for whole shoe. Water resistance |
| EN 13074:2002 | Methods of test for petroleum and its products. Petroleum products. Bitumen and bituminous binders. Recovery of binder from bitumen emulsions by evaporation |
| EN 13075-1:2002 | Methods of test for petroleum and its products. Determination of breaking value of cationic bitumen emulsions, mineral filler method |
| EN 13075-2:2002 | Methods of test for petroleum and its products. Determination of fines mixing time of cationic bitumen emulsions |
| EN 13076:2003 | Devices to prevent pollution by backflow of potable water. Unrestricted air gap. Family A. Type A |
| EN 13077:2003 | Devices to prevent pollution by backflow of potable water. Air gap with non-circular overflow (unrstricted). Family A, type B. |
| EN 13078:2003 | Devices to prevent pollution by backflow of potable water. Air gap with submerged feed incorporating air inlet plus overflow. Family A, type C |
| EN 13079:2003 | Devices to prevent pollution by backflow of potable water. Air gap with injector. Family A. Type D |
| EN 1308:1999 | Adhesives for tiles. Determination of slip |
| EN 13080:2002 | Agricultural machinery. Manure spreaders. Environmental protection. Requirements and test methods |
| EN 130800:2001 | Harmonized system of quality assessment for electronic components. Sectional specification. Tantalum surface mounting capacitors |
| EN 13081:2001 | Tanks for transport of dangerous goods. Service equipment for tanks. Vapour collection adapter and coupler |
| EN 13082:2001 | Tanks for transport of dangerous goods. Service equipment for tanks. Vapour transfer valve |
| EN 13083:2001 | Tanks for transport of dangerous goods. Service equipment for tanks. Adapter for bottom loading and unloading |
| EN 13084-1:2000 | Free-standing industrial chimneys. Free-standing industrial chimneys. General requirements |
| EN 13084-2:2001 | Free-standing industrial chimneys. Concrete chimneys |
| EN 13084-4:2002 | Free-standing industrial chimneys. Brick liners. Design and execution |
| EN 13084-6:2004 | Free-standing chimneys. Steel liners. Design and execution |
| EN 13084-8:2005 | Free-standing industrial chimneys. Design and execution of mast construction with satellite components |
| EN 13085:2001 | Wallcoverings. Specification for cork rolls |
| EN 13086:2000 | Lead and lead alloys. Lead oxides |
| EN 13087-1:2000 | Protective helmets. Test methods. Conditions and conditioning |
| EN 13087-10:2000 | Protective helmets. Test methods. Resistance to radiant heat |
| EN 13087-2:2000 | Protective helmets. Test methods. Shock absorption |
| EN 13087-3:2000 | Protective helmets. Test methods. Resistance to penetration |
| EN 13087-4:2000 | Protective helmets. Test methods. Retention system effectiveness |
| EN 13087-5:2000 | Protective helmets. Test methods. Retention system strength |
| EN 13087-6:2000 | Protective helmets. Test methods. Field of vision |
| EN 13087-7:2000 | Protective helmets. Test methods. Flame resistance |
| EN 13087-8:2000 | Protective helmets. Test methods. Electrical properties |
| EN 13088:2001 | Manufactured articles filled with feather and down. Method for the determination of a filled product's total mass and of the mass of the filling |
| EN 13089:1999 | Mountaineering equipment. Ice tools. Safety requirements and test methods |
| EN 13090:2000 | Means for resealing threaded joints of gas pipework in buildings |
| EN 130900:1998 | Harmonized system of quality assessment for electronic components. Sectional specification: fixed polystyrene film dielectric metal foil d.c. capacitors |
| EN 130901:1998 | Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polystyrene film dielectric metal foil d.c. capacitors. Assessment level E |
| EN 130902:1998 | Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polystyrene film dielectric metal foil d.c. capacitors. Assessment level EZ |
| EN 1309-1:1997 | Round and sawn timber. Method of measurement of dimensions. Sawn timber |
| EN 13091:2000 | Biotechnology. Performance criteria for filter elements and filtration assemblies |
| EN 13092:2000 | Biotechnology. Guidance on sampling and inoculation procedures |
| EN 13094:2004 | Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction |
| EN 13095:2000 | Biotechnology. Performance criteria for off-gas systems |
| EN 13096:2003 | Transportable gas cylinders. Conditions for filling gases into receptacles. Single component gases |
| EN 13098:2001 | Workplace atmospheres. Guidelines for measurement of airborne micro-organisms and endotoxin |
| EN 13099:2003 | Transportable gas cylinders. Conditions for filling gas mixtures into receptacles |
| EN 1310:1997 | Round and sawn timber. Method of measurement of features |
| EN 13100-1:2000 | Non destructive testing of welded joints of thermoplastics semi-finished products. Visual examination |
| EN 13100-2:2004 | Non destrictive testing of welded joints of thermoplastics semi-finished products. X-ray radiographic testing |
| EN 13100-3:2004 | Non-destructive testing of welded joints in thermoplastics semi-finished products. Ultrasonic testing |
| EN 13101:2002 | Steps for underground man entry chambers. Requirements, marking, testing and evaluation of conformity |
| EN 13103:2001 | Railway applications. Wheelsets and bogies. Non-powered axles. Design method |
| EN 13104:2001 | Railway applications. Wheelsets and bogies. Powered axles. Design method |
| EN 13107:2004 | Safety requirements for cableway installations designed to carry persons. Civil engineering works |
| EN 13109:2002 | LPG tanks. Disposal |
| EN 131-1:1993 | Ladders. Specification for terms, types, functional sizes |
| EN 1311:1997 | Round and sawn timber. Method of measurement of biological degrade |
| EN 13110:2002 | Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG). Design and construction |
| EN 13111:2001 | Flexible sheets for waterproofing. Underlays for discontinuous roofing and walls. Determination of resistance to water penetration |
| EN 13112:2002 | Tannery machines. Splitting and bandknife shearing machines. Safety requirements |
| EN 13113:2002 | Tannery machines. Roller coating machines. Safety requirements |
| EN 13114:2002 | Tannery machines. Rotating process vessels. Safety requirements |
| EN 13115:2001 | Windows. Classification of mechanical properties. Racking, torsion and operating forces |
| EN 13116:2001 | Curtain walling. Resistance to wind load. Performance requirements |
| EN 13117-1:2000 | Transport packaging. Reusable, rigid plastics distribution boxes. General purpose application |
| EN 13117-2:2000 | Transport packaging. Reusable, rigid plastics distribution boxes. General specifications for testing |
| EN 13118:2000 | Agricultural machinery. Potato harvesting equipment. Safety |
| EN 131-2:1993 | Ladders. Specification for requirements, testing, marking |
| EN 1312:1997 | Round and sawn timber. Determination of the batch volume of sawn timber |
| EN 13120:2004 | Internal blinds. Performance requirements including safety |
| EN 131200:2002 | Harmonized system of quality assessment for electronic components. Sectional Specification. Fixed capacitors with metallized electrodes and polypropylene dielectric |
| EN 131201:2002 | Blank detail specification: fixed capacitors with metallized electrodes and polypropylene dielectric |
| EN 13121-1:2003 | GRP tanks and vessels for use above ground. Raw materials. Specification conditions and acceptance conditions |
| EN 13121-2:2003 | GRP tanks and vessels for use above ground. Composite materials. Chemical resistance |
| EN 13121-4:2005 | GRP tanks and vessels for use above ground. Delivery, installation and maintenance |
| EN 13123-1:2001 | Windows, doors and shutters. Explosion resistance. Requirements and classification. Shock tube |
| EN 13123-2:2004 | Windows, doors, and shutters. Explosion resistance. Requirements and classification. Range test |
| EN 13124-1:2001 | Windows, doors and shutters. Explosion resistance. Test method. Shock tube |
