Home > Products > Chemicals > Other Chemicals

• Product Identification

Name:  Disposable virus sampling tube

Packaging Specification:

Type Ⅰ (Inactivated) :0.5ml, 1ml, 1.5ml, 2ml, 2.5ml, 3ml, 4ml, 5ml, 10ml;

Type Ⅱ (Non-inactivated) :0.5ml, 1ml, 1.5ml, 2ml, 2.5ml, 3ml, 4ml, 5ml, 10ml;

Type Ⅲ (With swabs) : 6cm, 7cm, 7.5cm, 8cm, 8.5cm, 9cm, 10cm, 12cm, 15cm, 17cm, 20cm, 22cm, 25cm

Storage and Stability：

1.The product should be stored in a dark, dry and cool environment. Avoid prolonged exposure to light.

2.Do not bump during transportation to avoid the sampling tube from rupturing; do not squeeze to avoid deformation of the sampling tube.

3.The product is valid for 12 months.

• Intended use

The disposable virus sampling tube can be used for the collection, transportation and storage of clinical samples.

• Classification Information and Conformity Assessment Route

The product falls into OTHERS in accordance to Directive 98/79/EC of the European parliament and of the Council of 27 October 1998 on in vitro diagnostic medical devices.

Annex III EC DECLARATION OF CONFORMITY in 98/79/EC Directive is chosen as conformity assessment procedure.

• Procedure

1.Open the package, take out the single-use virus sampling tube, and mark relevant information;

2.Take the matching swab and place it on the area where the specimen needs to be collected (such as the nasal cavity, oral cavity, throat, vagina, urethra, etc.), and gently wipe it more than 15 times to collect the sample.

3.Open the cover of the sampling tube, insert the swab of the collected sample into the sampling tube and break it from the fragile part, insert the swab head into the preservation solution in time, and tighten the tube cap;

4.Place the tightened virus sampling tube properly, and then transport to the inspection department for inspection within 48 hours.