Home > Products > Electronics & Electricity > Electronic Instrument > Other Electronic Instrument

TN4228  Programmable Foam Hardness and Stress Tester

INTRODUCTION

It is used to measure the long-term low-cycle compression fatigue properties of soft materials (sponge, foam, etc.), and can also be programmed to measure the collapsible hardness index, collapsible hardness characteristics, sag hardness test, stress-strain characteristics, etc.

Applicable to the relevant standard method A, B, C and special standard requirements, specifications.

Can be used for polymer porous elastic materials, polymer materials, metal and non-metal tensile, compression, bending, low cycle fatigue and other items of detection, can obtain the compressive hardness index, compressive stress, maximum test force, yield force, compressive strength, bending strength and other parameters.

FEATURES AND BENEFITS

1.Automatic calibration : can automatically realize the calibration of the value standard degree, optional international units of kgf, lbf, N, KN, Kpa; Mpa, mm, cm, inch.

2.Large liquid crystal multi-language real-time display test force, peak, displacement, speed, state, curve change chart, etc.

3.Rupture judgment : after the sample fracture, the moving beam automatically stops moving.

4.Limit protection : with mechanical and control two level limit protection function.

5.Load measuring sensor 5% overload protection, maximum 800%.

6.High quality motor drive, super quiet work.

7.Original high quality precision ball screw and guidance system.

8.High precision closed-loop speed controller, slow running device and optional fast return trip.

9.Universal USB port.

10.Fixed load and stroke protection limit, immediate load and tensile cycle test, long-term creep test.

11.Optional automatic reset, automatic return to zero.

TECHNICAL PARAMETERS

1.Capacity : 5000 N(500 kg), 10 KN, 20 KN, optional

2.Load resolution : 1/200000

3.Load accuracy : ≤0.2% F·S

4.Test speed : 0.001~500 mm/min stepless adjustable

5.Speed accuracy : ±0.2%

6.Travel : 0~20 cm

7.Displacement decomposition : 0.001mm

8.Displacement accuracy : ≤0.2%

9.Sample size : 380 mm×380 mm,50 mm in thickness (according to the standard)

10.Upper pressure disc specification : unique design, diameter 200mm, bottom fillet R= 1 mm

11.Lower platform : 420×420 mm, diameter of air vent about 6 mm, spacing of 20 mm

12.Power supply : AC220V,50 Hz

13.Weight : 100 kg

14.Dimension : 85×45×100 cm

STANDARDS

GB/T 10807,ISO 2439;GB/T 12825,ISO 2439;CNS 15558-2,GB/T 18942.1,ISO 3386-1;

GB/T 18942.2,ISO 3386-2;ASTM D3674;JIS K6400-2;GB/T 18941,QB/T 2819,ISO 3385,FZ/T 62024-2014

Our products are all certified by international authority,national metrolog inspection center, won praise from customers all over the world ,including SGS,ITS,BV,TUV Sud,TUV Rheinland,CTI,etc

NEW TOTAL SOLUTIONS

HONOR AND CERTIFICATES

STANDARD PACKING

MULTIPLE TRANSPORTATION