| Model: | C-1503S |
|---|---|
| Brand: | BLUE |
| Origin: | Made In China |
| Category: | Construction & Decoration / Building Heater |
| Label: | Helical , oil separator , condensing units |
| Price: |
US $60
/ pc
|
| Min. Order: | 1 pc |
| Last Online:28 Oct, 2021 |
General Description：
Oil separators should be installed vertically on the discharge line,as close as possible to the compressor
Connection diameter of the oil separators should be higher than or equal to the diameter of discharge line
In the case of a multi-compressor installation mounted in parallel,it is recommended to use one oil separator by compressor,in order to keep an optimal efficiency at all operating rates,otherwise,the separator should be selected based on the sum of each compressor's maximum capacity.
The oil separation performances will depend directly on the flow rate of the oil/refrigerant mixture at the inlet of the separators.
In order to prevent all risks of refrigerant condensation,it is recommended to not install the oil separators in the air flow produced by the fans,In a cold environment,it may be necessary to provide for the installation of an heat insulation or a heating element around the separators.
The efficiency of the oil separation is never 100%,especially with variable operating .
| Model | Connection (ODF) | Connection type | Drawing No. | φ1 | φ2 | L | E1 | E2 | E3 | E4 | Carly Reference Model | |
| BLR/C-1503 S | 3/8 | 2 | 1 | 101.6 | 109 | 283 | 80 | 71 | 175 | 84 | Turboil 1503 S | Turboil 1503 MMS |
| BLR/C-1504 S | 1/2 | 2 | 1 | 101.6 | 109 | 283 | 80 | 71 | 175 | 84 | Turboil 1504 S | Turboil 1504 MMS |
| BLR/C-1505 S | 5/8 | 2 | 1 | 101.6 | 109 | 305 | 82 | 73 | 197 | 84 | Turboil 1505 S/MMS | |
| BLR/C-3006 S | 3/4 | 2 | 1 | 101.6 | 109 | 308 | 85 | 76 | 200 | 84 | Turboil 3006 S | Turboil 3006 MMS |
| BLR/C-3007 S | 7/8 | 2 | 1 | 101.6 | 109 | 358 | 97 | 83 | 250 | 84 | Turboil 3007 S | Turboil 3007 MMS |
| BLR/C-3009 S | 1 1/8 | 3 | 1 | 101.6 | 109 | 390 | 107 | 80 | 282 | 84 | Turboil 3009 S | Turboil 3009 MMS |
| BLR/C-3011 S | 1 3/8 | 3 | 1 | 101.6 | 109 | 487 | 116 | 90 | 379 | 84 | Turboil 3011 S/MMS | |
| BLR/C-6009 S | 1 1/8 | 3 | 1 | 101.6 | 109 | 434 | 107 | 80 | 327 | 84 | Turboil 6009 S | Turboil 6009 MMS |
| BLR/C-6011 S | 1 3/8 | 3 | 1 | 101.6 | 109 | 549 | 116 | 90 | 441 | 84 | Turboil 6011 S/MMS | |
| BLR/C-7011 S | 1 3/8 | 3 | 2 | 152.4 | 156 | 419 | 149 | 114 | 249 | 109 | Turboil 7011 S/MMS | |
| BLR/C-8013 S | 1 5/8 | 3 | 2 | 152.4 | 156 | 498 | 149 | 114 | 329 | 109 | Turboil 8013 S | Turboil 8013 MMS |
| BLR/C-9017 S | 2 1/8 | 3 | 2 | 152.4 | 156 | 512 | 162 | 127 | 342 | 109 | Turboil 9017 S/MMS | |
| Model | Connection (ODF) | Drawing No | Connnection type | φ1 | φ2 | φ3 | L1 | L2 | E1 | E2 | E3 | E4 | E5 | E6 | Volume (L) | Carly Reference Model | |
| BLR/C-F 2505 S | 5/8 | 2 | 1 | 101.6 | 109 | 140 | 303 | 441 | 82 | 73 | 113 | 204 | 222 | 35 | 2.29 | Turboil-F 2505 S/MMS | |
| BLR/C-F 3007 S | 7/8 | 2 | 1 | 101.6 | 109 | 140 | 355 | 494 | 102 | 83 | 113 | 204 | 222 | 35 | 2.62 | Turboil-F 3007 S | Turboil-F 3007 MMS |
| BLR/C-F 3009 S | 1 1/8 | 3 | 1 | 101.6 | 109 | 140 | 387 | 526 | 107 | 88 | 113 | 204 | 222 | 35 | 2.82 | Turboil-F 3009 S | Turboil-F 3009 MMS |
| BLR/C-F 3011 S | 1 3/8 | 3 | 1 | 101.6 | 109 | 140 | 485 | 623 | 116 | 90 | 113 | 204 | 222 | 35 | 3.56 | Turboil-F 3011 S/MMS | |
| BLR/C-F 7011 S | 1 3/8 | 3 | 1 | 152.4 | 156 | 200 | 395 | 523 | 148 | 114 | 99 | 258 | 276 | 40 | 5 | Turboil-F 7011 S/MMS | |
| BLR/C-F 8013 S | 1 5/8 | 3 | 1 | 152.4 | 156 | 200 | 428 | 555 | 148 | 114 | 99 | 258 | 276 | 40 | 6 | Turboil-F 8013 S | Turboil-F 8013 MMS |
| BLR/C-F 9017 S | 2 1/8 | 3 | 1 | 152.4 | 156 | 200 | 441 | 569 | 161 | 127 | 99 | 258 | 276 | 40 | 6 | Turboil-F 9017 S/MMS | |
| BLR/C-F 15013 S | 1 5/8 | 3 | 2 | 219.1 | 224 | 150 | 492 | 821 | 174 | 149 | 307 | 126 | 249 | 35 | 11.5 | Turboil-F 15013 S | Turboil-F 15013 MMS |
| BLR/C-F 15017 S | 2 1/8 | 3 | 2 | 219.1 | 224 | 150 | 550 | 879 | 195 | 171 | 301 | 126 | 249 | 35 | 13.2 | Turboil-F 15017 S/MMS | |
| BLR/C-F 15021 S | 2 5/8 | 3 | 2 | 219.1 | 224 | 150 | 565 | 894 | 215 | 184 | 301 | 126 | 249 | 35 | 13.4 | Turboil-F 15021 S | Turboil-F 15021 MMS |
| BLR/C-F 30025 S | 3 1/8 | 3 | 2 | 219.1 | 224 | 150 | 577 | 906 | 234 | 185 | 301 | 126 | 249 | 35 | 13.5 | Turboil-F 30025 S | Turboil-F 30025 MMS |
Production site:
