Home > Products > Industrial Supplies > Other Industrial Supplies

Key Specifications/Special Features:
IGU-BD3C-5 is a low-cost, broadband, and micro power consumption broadband smart seismic sensor. Based on the high-sensitivity geophone DT-SOLO--proudly produced by DTCC, and incorporated with electronics and software technologies in mobile internet era. With internationally well-received and reliable electronic spread spectrum technology, the frequency band range of IGU-BD3C-5 is up to 0.2Hz-150Hz. Due to its high reliability and high level of customization of storage and power capacity, it is very suitable not only for traditional active seismic exploration, but also for long-period observation of natural microseismic, transient surface wave survey and mobile station natural earthquake monitoring, etc.

· New 3 Components BroadBand Smart Seismic Sensor

· Low Frequency Reach to 5s

· Available in 0.2Hz~150Hz

· Light Weight 2.7kg including battery

· Internal Battery Support up to 27 Days of Continuous recording

· 32GB Non-volatile Flash Memory, could be Expended to 64GB

· Real-time Seismic Data Monitoring and sensor status QC

· Support for External Power Supply and Bluetooth QC

· Dual LED for Status QC Indicate Level and Working Status

The Heart of SmartSolo® IGU-BD3C-5 

High-quality seismic data is derived from high-quality seismic sensors. DT-SOLO's high-sensitivity geophone is specially designed for single point receiver applications. It is well known to the seismic industry as the top-quality high-sensitivity geophone ​and​ is widely used by ​major ​contractors and equipment manufacturers.

· High Quality

· High Sensitivity

· Low Distortion

· Super Reliable

· Greater Savings

· Single Point Receiver

· Available in 5Hz

· High Spurious Frequency

· Industry Leader

Physical Specs

· Seismic data channel(s):  3

· ADC resolution: 24 bits

· Sample intervals: 0.25, 0.5, 1, 2, 4 milliseconds

· Self-noise Level : Whole frequency band lower than the NHNM curve，5s~1Hz lower than the NLNM curve

· Operating temperature: -40℃ ~ +70℃

· Waterproof : IP67

· Physical Size: φ158mm × 160mm (w/o spike)

· Weight: 2.7 kg (Including internal battery and spike)

· Data Storagel: 32GB (can be expanded to 64GB)

· Operating Life 25℃: 30 days Continuous

· 60 days Segmented (12hours ON/12hours SLEEP)

· External Power Supply: 7V~15V DC (single supply)

· Bluetooth QC: Available

· Data Harvesting : USB 3.0

· Charging Temperature Range: +3˚C ~ +45˚C

Acquisition Performance

· Frequency Bandwidth: 0.2Hz~150Hz

· Distortion: <0.1% 12Hz, (0° ~ 10°) tilt，(0°~3°) horizontal tilt

· Sensitivity : 200V/m/s (5.08 V/in/s)

· Remark: All parameters are specified at +22℃ in the vertical position and horizontal position for horizontal geophone unless otherwise stated.

Channel Performance

 (@ 2ms sample interval, 31.25 Hz, 25°C, unless otherwise indicated)

· Maximum Input Signal:  ±2.5Vpeak  Gain 0dB

· Instantanteous Dynamic Range: 120dB Gain 0dB

· Common Mode Rejection:  >100dB

· Gain Accuracy: < 0.5%

· GPS Time Standard：1 ppm

· Timing Accuracy：±10µs, GPS Disciplined

· Cross Feed：< -110dB

· Inter-channel Phase Offset：<0.1ms

· Transverse Vibration Rejection：Better than 1%

· Inter-channel Amplitude Coherence：5%

· System Dynamic Range: 140dB

· Frequency Response: 0~1652Hz