Home > Products > Construction & Decoration > Pipe, Tube & Parts > Pipe Fittings

Stainless Steel Flange Rubber Joint

Rubber expansion joints are flexible connectors made of natural or synthetic elastomers and fabrics. Stainless steel flange rubber joints are widely used in pipelines with different pressures and media. Thermal growth, equipment movement, vibration or pressure fluctuation may cause movement in the pipeline system. When this motion is not absorbed by the pipeline system itself, stainless steel rubber joints are the perfect solution.

Features: vibration absorption, noise reduction, high pressure resistance, good elasticity, large displacement, balance pipe deviation, easy installation

Attributes:

Dimension: DN32mm-DN3000mm

Product pressure: 0.6-2.5 MPa

Product Material: NR, EPDM, NBR, KFM, PTFE, CR

Working temperature: - 40 degrees to 80 degrees (can also process high temperature resistant rubber joints)

Scope of application: acid, alkali, corrosion, oil, hot water, cold water, compressed air, compressed natural gas, etc.

Performance

Reducing Fatigue Coefficient

In view of the inherent characteristics of natural and synthetic elastomers, due to the steel and rubber interfaces of joints and flanges, they will not suffer from fatigue damage or embrittlement, and can prevent any electrolysis.

Excellent wear and corrosion resistance

A wide range of natural, synthetic and special purpose elastomers and fabrics can be used by the industry. Processing and assembling of materials to meet various actual pressure/temperature operating conditions, corrosive erosion, wear and erosion.

Minimum Face-to-Face Size while Absorbing Large Motion

Rubber expansion joints have the smallest face-to-face length, providing excellent movement in the direction of axial compression, axial extension and lateral deflection, as well as in the direction of angle and torsion.

Due to the inherent flexibility of rubber, spring stiffness is low.

The inherent flexibility of rubber expansion joints allows almost unlimited bending to recover from the imposed motion, requiring relatively small forces to move, thereby preventing damage to power equipment.