Home > Products > Electronics & Electricity > Electronic Instrument > Other Electronic Instrument

The TK1030 digital multimeter calibrator and multifunction calibrator are suitable for calibrating and verifying various current, voltage and multimeters below 0.5 level. It can also be used as a high-stability test power supply, with high-grade standard meters, to calibrate standard ammeters and voltmeters above 0.5.
  The TK1030 multifunctional calibrator is a 51/2-digit LED display digital AC and DC standard voltage and current generator. The whole machine adopts "closed loop" control with high output stability. It can be used to calibrate digital and various pointers. Three-purpose meter and various meter heads below DC 0.1 and AC 0.5.

 TK1030 multifunctional calibrator has 11 voltage output ranges, (0-1000V) current output 11 ranges (0-50A), median resistance 2*11 ranges (0-24MΩ), AC frequency: mains synchronization, 50Hz, 60Hz, 400Hz , 1KHz, five display windows simultaneously display the actual output value, percentage, range, error, frequency, and the range value of the tested meter can be selected and the magnification can be selected according to the scale of the tested meter. The output adjustment adopts digital adjustment, which can be adjusted by position or percentage. This instrument uses a digital A/D conversion chip, which greatly improves the conversion speed and accuracy. This machine adopts new devices such as a new type of composite power amplifier, which has the advantages of large output power, high reliability, good stability, low distortion, and convenient use.

Another name for multimeter calibrator

Digital three-meter calibrator, three-meter calibrator, three-meter calibrator, multimeter calibrator manufacturer, three-meter calibrator manufacturer

Multimeter calibrator function

1. It adopts two digital adjustment methods, "position by position" and "percentage" adjustment. It can also be adjusted through an external encoder adjustment box, which is easy to use.
2. The range can be selected according to the full scale value of the tested meter, and multiple step adjustments can be selected through the magnification adjustment (that is, output to the full scale value in several steps)

3. There are three-digit error display, which can directly display the relative error of the tested meter
4. RS232 interface can be configured for data output and printing
5. Perfect protection measures, with protections for voltage short circuit, current open circuit, overvoltage, and overload. Minimize damage to the instrument or the meter under inspection caused by improper operation
6. The whole machine adopts "closed loop" control and program-controlled output, which ensures the stability and accuracy of the output.
7. It adopts new devices such as new composite power amplifier, which has high power, strong load capacity, high reliability and good stability, and the maximum output current can reach 60A. ’
8. Equipped with clamp meter coil, which can verify AC and DC clamp meters
9. The international popular "closed shell" calibration technology is adopted, and the instrument can be calibrated without opening the box, and other frequency outputs can be set according to the agreement