Walking horizontal rewinder
Product Description
One. Purpose:
It is mainly used to wind the Al-Ti-B rod with a diameter of Φ9.5mm into a tightly arranged disc rod.
Two. Composed of:
It is mainly composed of straightening device, walking closing device, electric control system and so on.
Three. Key technical data
1. Closing rod diameter: Φ9.5mm
2. Closing speed: 1.5-2m/s
3. Disk size: Φ800×Φ360×280mm
(Outer diameter × inner diameter × height) (customizable)
4. Technical requirements
1. The rod diameter can be set by the operator according to the actual diameter, and the ring weight is 50-250kg/ circle.
2. Make natural transitions when layering.
3. Each layer should be smooth between the lines, and between the layers should be smooth.
4. The core can be shrunk, easy to unload the ring.
5. The lever adopts frequency conversion speed regulation.
6. The line adopts AC servo motor walking rod.
Product Image
Img 1
Img 2
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
