| Model: | WUHF-RFID8160M |
|---|---|
| Brand: | ShenZhen Yunye |
| Origin: | Made In China |
| Category: | Security & Protection / Access Control System |
| Label: | UHF Reader Module , RFID Reader Module , R2000 RFID Module |
| Price: |
-
|
| Min. Order: | 1 pc |
| Last Online:21 Jun, 2021 |
WUHF - RFID8160M is a high performance UHF RFID Reader Module. Based on proprietary efficient digital signal processing algorithm, it supports fast tag read/write operation with high identification rate. It can be widely applied in many RFID application systems such as logistics, access control, attendance system, anti-counterfeit and industrial production process control system.
1. Product View
|
Module Type |
WUHF-RFID8160M |
|
Real Photo |
 |
|
RF Channel |
Single Channel |
|
RF Connector |
MMCX |
|
Antenna Connection Mode |
Single Antenna |
|
Interface Connector |
Molex 53261-1571 |
|
RF Connectors Material |
Gold-plated brass |
|
PCB Material |
Rogers FR4 gold-plated |
|
Shield Material |
Aluminum |
|
Size |
55.5*39.5*8mm |
2. PIN Connector Pin Assignments
|
|
||
|
PIN ID |
Interface |
Instruction |
|
PIN 1 |
GND |
Meanwhile grounding |
|
PIN 2 |
GND |
|
|
PIN 3 |
3.7V – 5V DC |
Meanwhile connect power |
|
PIN 4 |
3.7V – 5V DC |
|
|
PIN 5 |
GPIO 3 |
Output |
|
PIN 6 |
GPIO 4 |
Output |
|
PIN 7 |
GPIO 1 |
Input |
|
PIN 8 |
Beeper |
Has driven with > 50mA output current |
|
PIN 9 |
UART_RXD |
TTL level |
|
PIN 10 |
UART_TXD |
|
|
PIN 11 |
USB_DM |
For testing |
|
PIN 12 |
USB_DP |
|
|
PIN 13 |
GPIO 2 |
Input |
|
PIN 14 |
EN |
High level enable |
|
PIN 15 |
GPIO 5 |
RS-485 direction control |
3. Key Features
|
Feature |
Descriptions |
|
|
1 |
Impinj R2000 Built-in |
* Impinj Indy R2000 chip as RF transceiver. |
|
2 |
Anti-collision Algorithm |
* Unique I - Search multi-tag identification algorithm providing the highest efficiency. |
|
3 |
Optimized Algorithm for Tags with Small Volume |
* Optimized applications for reading small volume tags with better respond time. |
|
4 |
Dual CPU Architecture |
* Main CPU: tag inventory; Assistant CPU: data management. * Tag inventory and data transfer are parallel and simultaneous. |
|
5 |
Fast Antenna Switch Inventory (For WUHF-RFID8460M and WUHF-RFID8860M) |
* Every antenna’s inventory duration is configurable (Minimum duration: 30 ms). * Polling from ANT 1 to the last antenna. |
|
6 |
Two Modes for Inventory |
* Buffer mode and Real-time mode. * Tags will be stored as buffer under buffer mode. * Tags will send data under real-time mode. This mode allows user to get tag data instantly. |
|
7 |
Hardware System Halt Detection |
* Hardware CPU status surveillance. * Run for 24hours X 365 days without system halt. |
|
8 |
PA Health Surveillance |
* PA status surveillance. * Make sure PA never works under saturated state. Protect it for long term operation. |
|
9 |
18000-6B/6C Full Compatible |
* It can be switched rapidly between 18000-6B and 18000-6C tag. |
|
10 |
18000-6B Large Data Read/Write |
* Read 216 bytes in one time takes less than 500ms. * Write 216 bytes in one time takes less than 3.5 seconds. * It can read/write data with different lengths. |
|
11 |
Antenna Connection Detection |
* Detect antenna connection status. * Protective for RF receiver. * It can be canceled by command. |
|
12 |
Temperature Sensor |
* Multi-point surveillance for accurate operating system temperature. |
|
13 |
Power Output Correction |
* Dual modules making sure output power can be finely adjusted. * Dual modules working and keeping correction unless they are both damaged. |
|
14 |
Excellent Cooling Design |
* Heat dissipation and large cooling surface design. * Thermal coupling interfaces using high-thermal conductivity solid materials which ensure stable performance under high temperature. |
