| Model: | - |
|---|---|
| Brand: | - |
| Origin: | Made In Japan |
| Category: | Electronics & Electricity / Electronic Instrument / Analysis Instrument |
| Label: | Japan TECLOCK , Dele Manual Rubber , Hardness Tester |
| Price: |
-
|
| Min. Order: | - |
| Last Online:25 Dec, 2024 |
Japan TECLOCK Dele Manual Rubber Hardness Tester Constant Pressure Test Bench GS-615
Product number:
GS-615
product name:
Hardness tester
Applicable Hardness Tester Model:
A, B, E, A (old style),
After optional ZY-090, it can be used for TYPE C type (ASKER C), O type
After ZY-046 is selected, it can be used for TYPE D, ASTM C, DO, JIS C (old models)
product manual:
Install the hardness tester on the manual measuring table, install the load required by the JIS standard, and manually measure the hardness of the product.
The use of cams makes the operation simple and at the same time cost-effective.
Using a test bench, the indenter can be in close contact with the workpiece, and the measurement is accurate.
The constant pressure of type A and type E hardness tester is 1kg, and the type D hardness tester needs to be equipped with ZY-046 5kg load. Digital hardness tester GSD series, ZY-090 1kg load is required.
Product Usage:
A tool used to hold and assist in the measurement of the hardness tester.
Technical Parameters
| Measure the load | Pack heavy model | Adapt to the type of hardness tester | |
| 1kg weight | Pointer type | ZY-087 (standard configuration) | A,B,E,JA,SRIS C, O |
| Digital | ZY-088 (optional) | ||
| 5kg weight (4kg weight) | ZY-046 | D, ASTM C, DO, old JIS C | |
| quality | 3.9kg |
Dimensions
IS K 6301 standard rubber hardness tester TECLOCK from Japan
Product number:
GS-706N
Old type A hardness tester, single needle
Picture of Type A Probe:
product name:
Hardness Tester, Rubber Hardness Tester, Plastic Hardness Tester
product manual:
TECLOCK rubber hardness tester, in some cases, such as measuring uneven surface or narrow flat surface and deep bottom, can be accurately measured.
The product has digital display, pointer (double needle and single needle).
Product Usage:
There are three general models of the hardness tester, A, D and C. When the A type is used for measurement, when the hardness is greater than 90, the D type is suitable. When the A type is unreasonable, and the hardness is less than 20, the C type is suitable. .
Type A is a rubber hardness tester for measuring general plastics.
Type E is a hardness tester for measuring soft plastics, such as sponge and soft rubber.
Type C is a durometer for rubber whose hardness is less than that of Type A.
Type D is a hardness tester for measuring height hardness. Such as hardness rubber, plastic hard rubber. If there is an unbalanced measuring surface, reduce the plane, for the irregular shape of the bottom of the concave and convex deep, can be measured well, digital display, easy to read the measured value.
Technical Parameters
| model | Types of | Application/Material | Stylus shapeSpring load value | |
|---|---|---|---|---|
| GS-703N | JIS C (old model) | Hard rubber | φ0.79 truncated cone 35° | 980-44100mN
（100-4500gf） |
| GS-703G | JIS C (old model) (pin type) | Hard rubber | φ0.79 truncated cone 35° | 980-44100mN
（100-4500gf） |
| GS-706N | JIS A (old model) | General rubber | φ0.79 truncated cone 35° | 539-8385mN
（55-855gf） |
| GS-706G | JJIS C (old model) (pin type) | General rubber | φ0.79 truncated cone 35° | 539-8385mN
（55-855gf） |
| GSD-706K | JIS A (old model) | General rubber | φ0.79 truncated cone 35° | 539-8385mN
（55-855gf） |
Dimensions
IS K 6301 standard rubber hardness tester TECLOCK from Japan
Product number:
GS-706N
Old type A hardness tester, single needle
Picture of Type A Probe:
product name:
Hardness Tester, Rubber Hardness Tester, Plastic Hardness Tester
product manual:
TECLOCK rubber hardness tester, in some cases, such as measuring uneven surface or narrow flat surface and deep bottom, can be accurately measured.
The product has digital display, pointer (double needle and single needle).
Product Usage:
There are three general models of the hardness tester, A, D and C. When the A type is used for measurement, when the hardness is greater than 90, the D type is suitable. When the A type is unreasonable, and the hardness is less than 20, the C type is suitable. .
Type A is a rubber hardness tester for measuring general plastics.
Type E is a hardness tester for measuring soft plastics, such as sponge and soft rubber.
Type C is a durometer for rubber whose hardness is less than that of Type A.
Type D is a hardness tester for measuring height hardness. Such as hardness rubber, plastic hard rubber. If there is an unbalanced measuring surface, reduce the plane, for the irregular shape of the bottom of the concave and convex deep, can be measured well, digital display, easy to read the measured value.
Technical Parameters
| model | Types of | Application/Material | Stylus shapeSpring load value | |
|---|---|---|---|---|
| GS-703N | JIS C (old model) | Hard rubber | φ0.79 truncated cone 35° | 980-44100mN
（100-4500gf） |
| GS-703G | JIS C (old model) (pin type) | Hard rubber | φ0.79 truncated cone 35° | 980-44100mN
（100-4500gf） |
| GS-706N | JIS A (old model) | General rubber | φ0.79 truncated cone 35° | 539-8385mN
（55-855gf） |
| GS-706G | JJIS C (old model) (pin type) | General rubber | φ0.79 truncated cone 35° | 539-8385mN
（55-855gf） |
| GSD-706K | JIS A (old model) | General rubber | φ0.79 truncated cone 35° | 539-8385mN
（55-855gf） |
Dimensions
Dongguan Gaotengda Precision Tools Co., Ltd.
[Agent CHEVALIER Taiwan Fuyu Precision Surface Grinding Machine CNC Grinding Machine]
FSG-12_16_20 series_new energy industry_lithium battery coating nozzle
FVGCseries_TC_20210518_V4 New Energy Industry
SMART-B818III_New Energy Industry_Ultrasonic Welding Head
Taiwan Fuyu CHevalIER CNC surface grinder, large water grinder
Vertical machining center, 5-axis machining center QP5X-400
Multifunctional CNC lathe, CNC lathe Taiwan Qiaojia JAGURA cylindrical grinder, centerless grinder
Japan RS-Japan Ultrasonic High Speed Spindle
Korea KTC fine hole electric discharge machine, punching machine
Italy DELTA vertical grinder LC-400, LC-500
Swiss DAMA Sharpener MM-12
Japan AMADA turning and milling compound processing machine
Japan Mitsui MITSUI surface grinder, grinder
Japan KIRA Kira machine tool KPC-30b, PCV-30
Japan Kondo circular grinding CKG series, ASZ series, UGK series, CTW series
| Embed HTML Code: | |
|---|---|
