Home > Products > Chemicals > Other Chemicals

Dayu Chemical, fine chemical suppliers, is a comprehensive chemical manufacturing company integrating scientific research, manufacture and international trade of types of chemical raw materials of the less lethal technology and ammunition. We can supply more than 30 kinds of chemical raw materials including CS powder, CS liquid solution, OC, PAVA and raw material of pyrotechnic such as Magnesium Powder, Aluminum Powder etc. The annual production capability of CS powder is 400 ton/year. We have tear gas powder, oc liquid, cs gas powder, cr powder,etc.

Barium peroxide is used in the preparation of barium salt or hydrogen peroxide, as an oxidant, bleach, mordant, disinfectant, etc.

White or grayish white heavy powder. The boiling point is 800 ℃. Toxic, 50 mg / kg LD50 (mice, subcutaneous). It is corrosive. It usually contains barium oxide. It decomposes slowly in the air. It is insoluble in water, but can hydrolyze slowly. Contact with dilute acid or water containing carbon dioxide, it decomposes into hydrogen peroxide, and reacts with hydration to form Bao 2 · 8H2O. The relative density was 4.96. Melting point 450 ℃.

Technical Sheet of barium peroxide for sale

Stability and Reactivity of Barium Peroxide

Stability: the product is stable when stored and used at normal ambient temperature.

Dangerous reaction: chemical reaction and decomposition in the presence of lower alcohols and water

Conditions to avoid contact: electrostatic discharge, heat, moisture, etc.

Prohibited substances: strong reducing agent, water, acids, flammables and combustibles, alcohols, carbon dioxide, active metal powder

Application of Barium Peroxide

Barium peroxide used in the preparation of barium salt or hydrogen peroxide, as an oxidant, bleach, mordant, disinfectant, etc.

It is also useful in fireworks because it burns with a dazzling green light.

Packaging of Barium Peroxide

Net Weight: 50kgs / Iron Drum

Protective Measures of Barium Peroxide

Emergency treatment of leakage

Isolate the contaminated area and restrict access. It is s ested that emergency treatment personnel should wear self-contained breathing apparatus and anti-virus clothing. Do not come into direct contact with the leakage. Do not let the leakage come into contact with organic matter, reducing agent and inflammable substance. A small amount of leakage: avoid dust, sweep up carefully, collect in closed container, mark and wait for treatment. A large amount of leakage: cover with plastic cloth and canvas to reduce scattering. Then they are collected and recycled or transported to the waste disposal site for disposal.

Protective measures

Respiratory system protection: it is recommended to wear the first mask type electric air supply filter dust respirator when it may be exposed to dust.

Eye protection: respiratory system protection has been done.

Body protection: wear polyethylene anti-virus clothing.

Hand protection: wear neoprene gloves.

Others: smoking, eating and drinking are prohibited at the worksite. After work, take a shower and change clothes. Keep good hygiene.

First aid measures

Skin contact: take off contaminated clothes immediately and rinse with plenty of flowing water for at least 15 minutes. See a doctor.

Eye contact: lift the eyelid immediately and rinse thoroughly with plenty of flowing water or normal saline for at least 15 minutes. See a doctor.

Inhalation: quickly leave the site for fresh air. Keep the respiratory tract unobstructed. If breathing is difficult, give oxygen. If breathing stops, perform artificial respiration immediately. See a doctor.

Ingestion: drink enough warm water, induce vomiting, wash stomach with 2% - 5% sodium sulfate solution, and catharsis. See a doctor.

Fire extinguishing method: fire extinguishing agent: dry powder and sand. Strictly prohibit water, foam, and carbon dioxide from fighting.