Adhesive lined heat shrink tubing with environmental sealing capability for a wide variety of electrical applications, including automotive and marine wire harness, wire splices, breakouts, and connector-to-cable transitions.
Features
1. 3:1 shrink ratio
2. Low longitudinal shrinkage
3. Flame retardant (out jacket only)
4. Super sealing against water, moisture or other contaminates
5. Continuous operating temperature : -45℃-125℃
6. Shrink Temperature:125℃
Technical Data
Property Test method Standard Performance
Tensile strength(MPa) ASTM D 2671 ≥ 10.4
Elongation(%) ASTM D 2671 ≥ 300
Tensile strength after aging(Mpa) UL224 158 ℃*168hr ≥ 7.3
Elongation after aging (%) UL224 158 ℃*168hr ≥ 200
Flammability ASTM D 2671 B Self-extinguish within 30s
Dielectric strength(kV/mm) IEC 60243 ≥ 15
Volume resistivity( Ω .cm) IEC 60093 ≥ 1*1014
Adhesive
Property Test method Standard Performance
Water Absorption ASTM D 570 ＜ 0.2
Softening Point( ℃ ) ASTM E 28 95
Strength of pearing (PE) ASTM D 1000 120N/25mm
Strength of pearing (Al) ASTM D 1000 80N/25mm
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content. To report fraudulent or illegal content, please click here.
