| Model: | P1008 |
|---|---|
| Brand: | POLYFORTE |
| Origin: | Made In China |
| Category: | Security & Protection / Anti-Stati |
| Label: | floor wax , anti static finish , esd flooring |
| Price: |
¥160
/ gallon
|
| Min. Order: | 1 gallon |
| Last Online:11 Apr, 2022 |
Product Description:
Polyforte offers the anti-static floor finish manufactured with alloy cross-linking technique. This premier floor finish is manufactured with acrylic-acid polymer and is combined with coalescent additives, leveling aids and wax emulsions. This fast-drying, wearable floor finish also provides a high-gloss, dust-free finish.
Product Specifications:
Surface resistance: 1x105-1x108Ω
volume resistance: 1x105-1x108Ω
Electrostatic attenuation: <0.3s
Electrification voltage: <70 V
Solid content: 20±0.5%
pH: 8.0-9.0
Specific weight: 1.03 (25℃)
Centrifuge test: 3000rpm, no change after 30 mins
Freezing-thawing test: no change after 3 cyclins
Coverage: 200m2/gal
Shelf life: 1 year minimal under room temperature
Packaging: 1gal/case, 4gal/case, 5gal/case
Anti-static performance has reached the SJ/T11159-98 requirement
Product use effect:
Product features:
Ultra stable/ low maintenance
Transparent/Can be applied on surfaces of all colors
Can be easily spread out on uneven surfaces
Fast drying/ Dries out within 30 mins, less waiting
High gloss/Gives a glossier finish after polishing
Dustproof/Requires minimal effort to maintain the cleanliness of the surfaces
Anti-skidding
Can be easily removed
DIRECTIONS FOR USE
Floor preparation:
To trip floor of old finish, first apply striping chemicals onto the floor using a mop and allow it to sit for about 5 minutes until white foam forms. Remove the finish with a floor scrubber. The procedure may be repeated in order to fully remove the old finish. Remove stripping agent from the surface with a water and dust collector. Rinse floor until all residues is removed.
If the floor was not polished, clean the floor with floor cleaning agent and a floor scrubber. Dry the floor with a mop and the finish can be applied.
Polish application: Dampen the mop with PolyforteTMAntistatic Floor Finish and wring out. Apply a thin, even coat of polish to floor using figure-of-eight strokes. Allow the polish to dry and apply a second coat using the same method.
Buffing and Burnishing: Buff floor with white buffing pad to a high shine. Polish after 24 hours to obtain a glossier finish.
Common errors and possible solutions:
|
1. |
Low gloss |
humid environment |
Use a fan to speed up air circulation. Must not blow directly to the floor. |
|
The second coat was applied before the first coat dried out |
Must apply the second coat after the first coat dries out |
||
|
Stripping agent was not fully washed off |
Fully remove the stripping agent before applying polish |
||
|
Incomplete buffing |
Buff after 24 hours |
||
|
2. |
Scratches |
Polish is too thick |
Redo after stripping |
|
3. |
Flaking |
Room temperature is too low (<5℃) |
Increase room temperature |
|
Long term usage of basic detergents |
Use neutral detergents |
||
|
Usage of two types of polishes |
Use only one type of polish |
||
|
Buffing pads or polishing pads are too hard |
Choose softer pads |
||
|
4. |
Stripes |
Polish is too thin, mop or floor was not cleaned properly |
Increase the amount of polish applied; Use clean mops and clean floor thoroughly before applying polish |
|
5. |
Fish eye shaped patterns |
Oil stains on the floor or oil-based protective agent has been applied |
Clean floor with degreasing agent or stripping chemicals |
|
6. |
Heavy foot prints |
Polish gets sticky due to low temperature and high humidity |
Buff for a few more times
|
Maintenance and related products
NOTE: The antistatic properties of the floor will be lost if cleaned with water. Cleaning with antistatic dedusting agent P1208 is recommended.
PolyforteTMAntistatic dedusting agent P 1208 is an environmentally friendly dedusting agent with a fresh lemon scent, designed to control static generation and to increase resistance to abrasion. The oil-based solution can effectively clean the floor and prevents dust from accumulating.
General Use Directions:
1. Soak clean mop in the PolyforteTMAntistatic dedusting agent for 12-24 hours, and then wring out.
2. Clean floor with the mop, dust can be removed by gently shaking the mop head.
PolyforteTMStripping Agent is a basic solution which can efficiently remove embedded dirt and old finish to provide a clean surface for reapplying polish. Compatibility test before usage is recommended.
Product applicable place
Cleanroom , Electronic control area, electronics factory , ESD relates area etc.
Packaging & Shipping
Delivery times: 7-10 working days after received the deposit 
Our Services
Accept OEM orders , products can be customized accoring to demand and flexible production .
Whether you are a small buyer or a big buyer ,we will provide you with the most professional solutions and quality service.
We supply new product training to our customers
Company Information
Polyforte Chemical Technology Co., Ltd is a private high-tech enterprise specializing in R&D ,production and sales of chemical products more than 15years ,which relying on institutions of higher education, Chinese Academy of Sciences and other scientific research institutions to develop high-tech chemical products, such as concrete seal hardener agent, coloring hardener, concrete repair materials, Ionic coloring agent, antistatic floor polish series, antistatic liquid series, static elimination agent series, and other products to fill the domestic gap and our products’ quality has reached the international advanced level. Our company insist that “to be the most sincere, to do our utmost ,to concentrate on the pursuit of perfection ”serve our customers.
factory & lab
Certifications
Exhibition
| Payment Terms: | Paypal T/T |
|---|---|
