Home > Products > Computers & AV Digital > Network Hardware & Parts

9 10 / 100M adaptive RJ45 ports. Ports 1 ~ 8 support Poe power supply, and the output power of the whole machine is 150W. At most, 8 ports are supported up to IEEE802 3af standard full load (15.4W) power supply or 4 ports up to IEEE802 3At standard full load (30W) power supply supports IEEE802 3x full duplex flow control and backpressure half duplex flow control support port auto MDI / mdix function. Poe power supply can transmit 250m. All ports have line speed forwarding capability

Model: pse908ex (9-port 100m unmanaged Poe switch)

• Nine 10 / 100M adaptive RJ45 ports, and Ports 1 ~ 8 support Poe power supply

• The output power of the whole machine is 150W, and supports up to 8 ports up to IEEE802 3af standard full (15.4W)

• Support "normal switch mode" and "v-lan mode"

• Support IEEE802 3x full duplex flow control and backpressure half duplex flow control

• Support automatic port flip (auto MDI / mdix) function

• All ports have line speed forwarding capability

Pse908ex is a 9-port 100m unmanaged Poe switch independently developed by Shenzhen LEGUO Network Technology Co., Ltd. It provides 9 10 / 100M adaptive RJ45 ports. Each port supports MDI / mdix automatic turnover function and can realize line speed forwarding. Ports 1-8 have Poe function and support IEEE802 3af standard can be used as Ethernet power supply equipment, which can automatically detect and identify the power receiving equipment that meets the relevant standards, and supply power to it through the network cable. Pse908ex is simple and convenient to use, without configuration, plug and play, and can flexibly expand home and office networks without being limited by power line layout.

• Port performance

Nine 10 / 100M adaptive RJ45 ports are provided. Ports 1 to 8 have Poe function. Port 9 can be used as uplink port, which greatly improves the utilization rate of Poe power supply port;

Each port supports MDI / mdix automatic turnover and self negotiation;

Support IEEE 802.3x full duplex flow control and backpressure half duplex flow control.

• Poe performance

Support IEEE802 3af standard;

Automatically detect and identify PD equipment conforming to IEEE 802.3af standard and supply power to it;

Support 8 ports up to ieee802.0 3af standard full load (15.4W) power supply, with a total power of 150W;

Intelligent power management: if the power of the power receiving equipment exceeds 123W, the system starts the priority mechanism to cut off the power supply of the port with low priority.

• Two working modes

Provide mode switching switch and support two working modes of "general switch mode" and "v-lan mode";

When the standard switching mode is turned on, the switch is an ordinary non managed switch, and ports 1-9 can communicate with each other;

Turn on VLAN isolation mode, switch on MTU VLAN, and ports 1-8 can only communicate with port 9 of the upper interface;

When the video monitoring mode is turned on, adjust the switch buffer to adapt to the video monitoring application and turn on the MTU VLAN.