| Model: | CRY6151 |
|---|---|
| Brand: | cry |
| Origin: | Made In China |
| Category: | Industrial Supplies / Industrial Supplies Stocks |
| Label: | CRY6151 , CRYSOUND |
| Price: |
US $4800
/ pc
|
| Min. Order: | 1 pc |
| Last Online:09 Dec, 2024 |
CRY6151 Electroacoustic analysis system
CRY6151 Electroacoustic Analysis System is a full-featured electroacoustic device tester launched by CRY Sound. It has a history of 10 years. It is powerful and stable. It can measure the performance indicators of headphones (USB, Bluetooth, common), microphones (electret, MEMS, moving-coil type), headphone and microphone assemblies, receivers/headphone speakers, speakers/loudspeakers (common, Bluetooth), communication helmets, loudspeaker crossover devices, and other electroacoustic devices, such as sensitivity (SPL), impedance, distortion (THD), resonance frequency F0, left and right headphone balance, left and right headphone position, phase polarity, microphone current and voltage, SNR, microphone directivity, speaker's TS parameters, telephone receiving and sending loudness ratings, etc. Its test frequency range can be up to 20 Hz - 20 kHz
Hardware
CRY6151 adopts a 4-channel data acquisition system, which can achieve the testing of 2 headphones and 2 microphone components in the same instrument.
Its hardware includes sound card module, power amplifier module, signal processing module, USB communication module. It is combined with software to perform various electroacoustic device tests.
Its chassis design and simple USB2.0 interface for data transfer can meet customers' various test environment requirements.
Software
CRY6151 V8.X supports WinXP and Windows 7 (32-bit) systems (corresponding drivers to be installed. It is necessary to inform the specific operating environment). It has a user-friendly interface, easy operation and powerful functions.
It supports a variety of sweep methods, including effective value, fast-stepping sweep, high precision stepping sweep, multi-tone test, white noise, and pink noise, etc. Choose different methods according to different test occasions and test needs.
The frequency response, sensitivity (SPL), distortion (THD), impedance, resonance frequency F0, phase, balance, polarity and other parameters can be measured and determined in one sweep, with higher test accuracy and faster speed.
Software
It is the earliest domestic instrument that can test Bluetooth audio. It is automatically paired without manual click.
It has the powerful sequence editing function, virtual signal generator, multimeter, and complete storage function, so that it is fully suitable for customers' applications in laboratories and production lines.
Device grading by sensitivity or by frequency response box; device barcodes can be read in.
Technical specification
| Sweep signal |
|---|
| Frequency range | 0.02～20kHz(1 - 96 kHz in special cases) |
| Frequency error | ＜0.01% |
| Frequency band range | 0.02～20kHz (customizable) |
| Octave mode | 1/3，1/6，1/12，1/24 (optional) |
| Frequency Response | ≤ ±0.2dB(based on 1 kHz) |
| Amplitude range | 50 - 5000 mV; error ≤ ±0.1 dB; distortion < 0.1% |
| Output impedance | 0，32Ω，150Ω，300Ω，450Ω，600Ω，750Ω，900Ω，1050Ω |
| Amplitude measurement |
|---|
| Frequency range |
0.2～20kHz |
| Frequency Response |
≤ ±0.5dB (based on 1 kHz) |
| Amplitude range |
Electric signal measurement: -80 to 10 dB (0 dB = 1 V) Acoustic signal measurement: 50 dB to 140 dB (94 dB = 1 Pa) Measurement error: ≤ ±0.2 dB Noise floor: -100 dBV |
| Impedance measurement |
|---|
| Frequency range |
0.02～20kHz |
| Measurement Range |
1～2000Ω |
| Measurement error |
≤ ±2% |
| Distortion measurement |
|---|
| Frequency range | 0.02～20kHz |
| Measurement Range | 0.1～80% |
| Measurement of ECM microphone voltage and current |
|---|
|
Voltage range |
0～6.4V（±50mV） |
|
Current range |
10～1000uA |
|
Measurement error |
≤ ±1% |
| Other |
|---|
| Optional accessories |
Mouth simulator: CRY601, CRY602 Ear simulator: CRY318, CRY711 Measurement microphone: CRY331-CRY507, CRY332 CRY series preamplifier CRY574 Bluetooth Dongle |
| Testing algorithm |
RMS algorithm, fast-stepping sweep, high precision stepping sweep, multi-tone test, white noise, pink noise |
| Whole instrument test error | ≤ ±1dB |
| Power supply | 50Hz，220V ± 10% |
| Operating environment | 0～+40℃，RH ≤ 80% |
| Dimension | 360mm X 316mm X 161mm |
| Payment Terms: | TT |
|---|---|
