YK-1800H Hydraulic Mill Roll Stand
Product Description
- structural feature:
- adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others,the lifting of the paper adopts hydraulic drive.
- brake adjustable adopts multipoint braking system.
- every stand matched two sets paper car , and they can paper on the both sides at the same time.
- tooth jammed with dual-stage head and jammed the first three \ four inches dual-stage
- technical parameters:
-
| Backstands action |
full hydraulic operation |
| the range of clamping paper |
MAX2200mm MIN800mm |
| clamping diameters |
MAX¢2200mm MIN¢350mm |
| Unilateral maximum load |
the MAX.5000Kg |
| Paper holder spindle diameter |
¢270mm |
| Working air pressure(Mpa) |
0.4---0.8Mpa |
| working power |
380V 50Hz/ 415V 50Hz/440V 50HZ |
- Hydraulic system parameters:
-
| working pressure (Mpa) |
16---18Mpa |
| hydraulic cylinder working range(lifting) |
¢125×440mm |
| hydraulic cylinder working range(clamping /Traverse) |
¢80×1300mm |
| hydraulic station motor power |
4KW short (S2)working system rated voltage and frequency:380V 50Hz |
| hydraulic station solenoid valve working voltage |
220V 50 Hz |
- Mainly purchased parts, raw materials and origin:
-
| Name of main parts |
Brands or place of origin |
material |
| Main shaft |
Day steel production |
Thick-walled seamless steel pipe diameter of 270mm |
| Swing arm |
Production by own |
Resin sand gray ironHT250 |
| wallboard |
Jigang prduction |
Q235AWelding parts |
| bearing |
HRB,ZWZ,LYC |
|
| Inflatable jam head |
Zhejiang xusheng |
3,4inch shared |
| Main electrical appliance |
France |
|
| Pneumatic components |
Japan SMC or taiwan AirTAC |
|
| Hydraulic station |
Shandong zaozhuang |
Taiwan oil pump solenoid valve |
| Six brake pumps |
Changzhou Sincerity |
|
- Hydraulic paper trolley, track (OPTION)
- structural feature:
- On the double position paper on design, hydraulic clamp for paper, paper unloading hydraulic push rod save manpower, hydraulic motor traction feeding trolley.
- track buried whole, the main frame of the 18th channel, beam and ¢ 20mm drawing bar welding, rail length 9000mm.
- Each paper Paper holder with both the car from both sides of the paper simultaneously.
- Mainly purchased parts, raw materials and origin:
-
| Name of main parts |
Brands or place of origin |
material |
| track and paper trolley |
|
NO16channel steel,Q235A,steel strip |
| bearing |
HRB,ZWZ,LYC |
|
| Payment Terms: | T/T,LC, Cash |
| |
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
