Home > Products > Industrial Supplies > Tools > Abrasives

Aluminum oxide is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut rate, hardness, and strength, it is widely used in grinding applications in addition to sanding and finishing applications.

Aluminium Oxide Paint Striping Disc with Fibre Backing (AO) Grit Size Table Corresponding To Raw Materials

Aluminium Oxide Paint Striper Disc with Fibre Backing (AO) Paint Striper Disc Size Table

Aluminium Oxide Paint Striper Disc with Fibre Backing (AO) Specification:

Max. RPM: 7000~10000 RPM

Outer Diameter: 100mm/115mm/125mm/150mm/180mm

Center Hole Diameter: 16mm/22mm

Other Raw Materials: Silicon Carbide (SC)

Aluminium Oxide Paint Striper Disc with Fibre Backing (AO) Materials that can be worked:

Aluminium

Cobalt-based alloys

Other non-ferrous metals

High-temperature-resistant materials

Nickel-based alloys (e. g. Inconell and Hasteloy)

Bronze

Hard non-ferrous metal

Titanium

Titanium alloys

Copper

Soft non-ferrous metal

Brass

Zinc

Stainless steel (INOX)

Grey/nodular cast iron (GG/GJL, GGG/GJS)

Annealed cast iron

Thermoplastics

Elastomers

Fibre-reinforced duroplastics (GRP, CRP)

Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)

Steel, cast steel

Aluminium Oxide Paint Striper Disc with Fibre Backing (AO) Applicable Industries

Applications

Surface work

Roughening

Cleaning

Safety Warning of Aluminium Oxide Paint Striper Disc with Fibre Backing (AO)

Instructions:

1. Please try to choose an operation indoor environment and wear protective guards and goggles.

2. Never exceed the recommended maximum permitted rotational speed for safety reasons.

3. In order to have a good stock removal rate, quality of surface, and thermal loading on the workpiece, the best performance would be with a recommended cutting speed of 15-20m/s.

4. Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to different grit flap wheels.

Safety Warning:

1. The clamping length between shank and grinders should be more than 15mm.

2. Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.

We also have kinds of paint and rust stripping wheel for sale, if you are interested, please contact us.

Keying Abrasives China products offer superior performance full whole grinding and polishing working including before, during and after manufacturing, through a long life and maximum aggression processing, especially suitable for spray painting, rust removal, welding grinding and polishing. Keying's core products, both mounted and unmounted flaps, help complete machining jobs more efficiently, faster and safer.

If you want to know more types of wheel flapper, please leave us a message.