Model: | CEJ-5000W |
---|---|
Brand: | CEJ |
Origin: | Made In China |
Category: | Electronics & Electricity / Battery, Storage Battery & Charger |
Label: | New energy , power inverter , DC to AC |
Price: |
¥368
/ pc
|
Min. Order: | 5 pc |
Last Online:20 Jun, 2024 |
For your optimal use,please read the user manual first before using.
· This is a Modified Sine Wave Power Inverter, applied for DC 12V, not for DC 24V.
· Due to the protection of vehicle cigarette lighter socket fuse, the output can reach up to 150W when you connect it with cigarette lighter plug. If you want the max 500W power output, please connect it to the vehicle battery with the clamps Directly.
· The quiet cooling fan is smart, will rotate at different speed according to the power load and temperature inside.So don't worry if the fan doesn't come on while the power load is low.
· Do not leave the power inverter in the ON position for long time while your car is off.
· Do not power electric appliances exceed 500 watts,some appliances may not be able to run due to the imperfection of modified sine wave technology, such as hair straightener, hair curlers, electric blanket, heater/heating pad etc.This is not item quality issue,but if this happens,please change to appliances with smaller rating power OR use a pure sine wave inverter.
Package List
1 x BESTEK 500W Power Inverter
1 x Cigarette Lighter Plug (27.5 inches)
2 x Alligator Battery Clips (Line lenth: 24 inches)
2 x 40A Fuses (Spare)
1 x User Manual
Inverter is a way to convert DC to AC power conversion device.12VDC or 24VDC input,220VAC/50HZ or 115VAC/60HZ Modified Sine Wave Output.1000 ~ 3000W series ideal for industrial and commercial electricity inverter to prov ide AC output as the same household electricity socket. Can supply a range of industrial equipment, electrical power, for commercial lighting and refrigeration equipment. Inverter has a wide range of uses, but also can be used for outdoor recreation and electronic tools for power supply. As technology advances, users need to move electronic equipment used in ancreasing number of inverters can be ready for these devices to provide sufficient AC power, to provide users with convenient mobile power.
Product Feature
1. Overtemperature protection: If the inverter internal temperature or ambient temperature is too hig h , inverter will automatically stop the output temperature protection to ensure safety of electrical eq uipment.
2. Battery low voltage protection: When the battery or power supply voltage is too low, the inverter will automatically shutdown protection to stop exporting in order to protect the battery or power supp ly is not impaired Harm. When the voltage is back to normal, the inverter automatically back to work.
3. A low-battery warning: When the battery voltage is below the normal range, the inverter will issue a warning sound to remind the user Ming-feng battery needs to recharge. Time Users should stop the op e ration of electronic equipment as soon as possible to charge the battery.
4. Battery over-voltage protection: When the DC input voltage range above the normal level when the in verter will automatically shut down to stop the output, note the voltage is too high, may be May damag e the machine.
5. Overload protection: When connected to the load exceeds the inverter rated power watts (W), the inverter will automatically shut down to stop the output. After the removal of overload, auto-return Reha bilitation work.
6. Short-circuit protection: When connected to the load severe short-circuit fault, inverter will auto matically shut down to stop the output. After the removal of short-circuit to automatically return to normal work.
7. Earth leakage protection: inverter in accordance with national security and leakage protection stan dards. When the earthing terminal there is leakage occurs, the leakage protection circuit to quickly t urn off inverter To prevent electric shock to the people. In case of electricity leakage problem, you must immediately close the inverter, unplug the AC there is leakage of suspicious loads, and then re-o pen the inverter switch button.