| Model: | RFP010-40NPX |
|---|---|
| Brand: | parker |
| Origin: | Made In China |
| Category: | Industrial Supplies / Environment Protection Facilities / Other Environment Protection Facilities |
| Label: | - |
| Price: |
US $55
/ pc
|
| Min. Order: | 1 pc |
| Last Online:10 Mar, 2023 |
Description
Parker high-flow cartridges are made of deep fine polypropylene or glass fiber membrane as filter media, with a large diameter of 6 inches / 152mm, no center rod, unidirectional opening, and specially designed to flow the liquid from the outside to the inside, ensuring that all contaminant particles are trapped outside the cartridge. The ultra-high flow rate design allows for a significant reduction in the use of cartridges and filters for the same flow rate application, resulting in significant savings in equipment investment costs and labor costs.
Applications: RO pre-filtration, seawater desalination pretreatment; power plant condensate filtration; biopharmaceutical industry API, solvent, water filtration, etc.
Filtration media :Water suspended matter, particulate matter, water dirt, bacteria and algae, rust, etc.
Features
1、The combination of surface filtration and deep filtration can significantly reduce the number of cartridges and significantly reduce the size of the supporting filter shell compared with ordinary cartridges.
2、The filter layer is made of high-efficiency and low-resistance material, which can achieve more than 99% of ultra-high filtration efficiency and prolong the service life of the filter cartridge.
3、The design of convenient handle significantly reduces the time of cartridge replacement and makes cartridge replacement simple and portable.
4、The overall polypropylene design and hot melt welding treatment effectively prevent the end cap from falling off and secondary pollution.
5、The design of sealed interface reduces the risk of bypass flow and ensures the sealing and reliability of filtration.
6、The folded design increases the filtering area and makes the pressure drop significantly lower than that of ordinary cartridge.
7. The design of large diameter increases the dirt holding capacity, prolongs the service life and reduces the production cost
Replacement Parker high flow cartridges
K series high flow filter cartridge product selection instructions
|
Series Standards |
Cartridge length specification |
Structure form |
Filtration accuracy |
Seals |
|
K-Series |
20--20” |
D- -Single seal |
005--0.5μm |
S--Silicone Rubber |
|
|
40--40” |
S-- Double seal |
010--1μm |
E--EPDM rubber |
|
|
60--60” |
|
030--3μm |
V--Viton |
|
|
|
|
050--5μm |
B--Nitrile rubber |
|
|
|
|
100--10μm |
|
|
|
|
|
200--20μm |
|
|
|
|
|
400--40μm |
|
|
|
|
|
700--70μm |
|
|
|
|
|
1000--100μm |
|
Specification of replacement Parker high-flow filter cartridge,
|
Filter Media |
Polypropylene(PP) |
|
Length |
20"(508mm), 40"(1016mm), 60"(1524mm) |
|
Outside Diameter |
6 inch (152mm) |
|
Inside Diameter |
3.5inch(89mm) |
|
Filtration Rating |
1μm, 2μm, 3μm, 5μm, 10μm, 20μm, 40μm, 70μm, 100μm |
|
Support/Drainage |
Polypropylene (PP) |
|
End Cap Material |
Glass fiber reinforced Polypropylene (PP) |
|
Outside |
Netting |
|
Seal Material |
EPDM, Buna-N, Viton |
|
Maximum Operating Temperature |
82°C |
|
Maximum Differential Pressure |
3.4Bar @ 82℃ |
|
S ested Maximum Flow Rate |
20"(508mm) - 30m³/h 40"(1016mm) - 50m³/h 60"(1524mm) - 70m³/h |
|
Replacement Parker Models |
|
|
MFNP005-40N |
RSCP010-60SPP |
|
MFNP010-40N |
RSCP045-20EPP |
|
MFNP050-40N |
RSCP045-60NPP |
|
MFNP100-40N |
RSCP100-20EPP |
|
MFNP050-40N-ITT |
RSCP100-40EPP |
|
RFP005-40NPX |
RSCP400-40EPP |
|
RFP010-40NPX |
RSCP400-60SPP |
|
RFP050-40NPX |
RMG010-20EPP |
|
RFP100-40NPX |
RMG010-40EPP |
|
RCP045-40EPP |
RMG045-20EPP |
|
RSCP045-40EPP |
RMG045-40EPP |
|
RSMG030-40EPP |
RMG045-60EPP |
|
RCP010-20EPP |
RMG045-60NPP |
|
RCP010-40EPP |
RMG100-20EPP |
|
RCP010-60SPP |
RMG010-60SPP |
|
RCP030-40EPP |
RMG400-60EPP |
