Home > Products > Industrial Supplies > Environment Protection Facilities > Other Environment Protection Facilities

Purifiying power supply for Electrostatic precipitators  1Purifiying power supply for Electrostatic precipitators  2Purifiying power supply for Electrostatic precipitators  3
  • Purifiying power supply for Electrostatic precipitators  1
  • Purifiying power supply for Electrostatic precipitators  2
  • Purifiying power supply for Electrostatic precipitators  3

Purifiying power supply for Electrostatic precipitators

Model: NYFMJD0720300
Brand:FSNOAH
Origin:Made In China
Category:Industrial Supplies / Environment Protection Facilities / Other Environment Protection Facilities
Label:ESP power supply , power supply for ESP
Price: US $5000 / unit
Min. Order:1 unit
Inquire Now

Member Information

Detail

Foshan Noah Electrical Co.,Ltd

Free MemberGuang Dong - China
Last Online:17 May, 2023

Product Description

The high frequency pulsed plasma power supply has excellent performance compared with the traditional thyristor-controlled power frequency power supply. It has many significant advantages for example, it has small output ripple, high average voltage and current, small size, light weight, integrated structure, high conversion efficiency and power factor, and uses three-phase balanced power supply which has small impact on the power grid. With these advantages the dust removal efficiency can be greatly improved. It is a revolutionary replacement product of the traditional thyristor power frequency power supply.

The high frequency pulsed plasma power supply independently developed by our company is the advanced high frequency pulsed power supply in China.It is widely used in air purification, electrostatic precipitator, desulfurization and denitrification, plasma application, gas phase deposition, vacuum electronics, microwave communication, laser pumping and other engineering and technical fields.

The high frequency pulsed plasma power supply developed by our company consists of two parts: one is the controller, which controls and monitors the smooth operation of the entire power supply, and the other is the high-voltage power supply, which is used for transformation ratio boost rectification and final output discharge.

 

Technical Parameter

Power distribution method: three phase five wires (A, B, C, N, GND)

AC input voltage: three-phase 380V ± 10%

AC power supply frequency: 50Hz ± 2%

Output voltage adjustment: 1~90%

Output current adjustment: 1~90%

Output power adjustment: 1~90%

Output duty cycle adjustment: 1~90%

Output frequency: 80kHz

Output pulse wave:

●Current waveform: quasi-square wave

●Voltage waveform: quasi-square wave

Engineering application combination mode: series boost and parallel current

Working mode: allow continuous operation under rated current

Cooling method: The controller is forced air cooling/water cooling, and the high-voltage power supply is ONAN

Protection level: IP54 for indoor and IP65 for outdoor

Engineering application combination mode: series boost and parallel current

High-voltage power supply parameters:

●Output voltage: the rated output DC voltage (unit: KV) is generally 20, 30, 40, 50, 60, 72, 80,100

●Output current: Rated output current (unit: mA) is generally 100, 200, 300, 400,500,600

●Impedance voltage: 30%~40%

●Transformer oil: 25# oil, withstand voltage greater than 40KV/2.5mm

●Negative high voltage to ground: 0Ω in the positive direction, 52/65/78 MΩ in the reverse direction

The structure of high-voltage controller: adopts cold-formed steel structure, the surface is electrostatic sprayed, and the upper busbar inlet meet GGD standard

National special standards: This product implements the national special standards of "JB/T 9588-1999 High Voltage Electrostatic Precipitator Rectifier Equipment"

Applicable electrode distance (electrode distance is 5kV/cm or 0.2cm/kV):

● Voltage 30kV, electrode distance 6cm

● Voltage 72kV, electrode distance 14.4cm


Product Image

Purifiying power supply for Electrostatic precipitators  1
Img 1
Purifiying power supply for Electrostatic precipitators  2
Img 2
Purifiying power supply for Electrostatic precipitators  3
Img 3

Send Inquiry to this Member

Foshan Noah Electrical Co.,Ltd

FENJIANGBEI ROAD NO.91, CHANCHENG, FOSHAN, GUANGDONG, CHINA.

Phone:
0086-0757-82710276
Fax:
0086-0757-82800127
Contact:
Wu Meng (General Manager)
Mobile:
13927735480
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Other Environment Protection Facilities Made In China Products

,  

Other Environment Protection Facilities China Suppliers and China Manufacturers