Home > Products > Metallurgy , Mining & Energy > Metallurgy & Mining > Bars, Rods, Angles, and Stainless Steel Shapes

AISI 4140 Steel Round Bar Sheet Plate, JIS SCM440, DIN 1.7225

What is AISI 4140 Steel?

AISI 4140 alloy steel round bar sheet plate belongs to medium hardenability steel.AISI 4140 steel has high fatigue strength and low notch sensitivity. Low-temperature impact toughness is also very high, no obvious temper brittleness. AISI 4140 steel round bar is mainly used after quenching and tempering state. it is used to manufacture high-strength parts under impact loads and the fittings with large cross-sections and other stressed members. Such as the horizontal eccentric shaft of the horizontal forging machine, the crankshaft of the forging press, and etc.
Its equivalent grade is JIS SCM440 and DIN 1.7225. The properties and composition of 4140 steel round bar sheet plate as below.

AISI 4140 Alloy steel material stockholders and suppliers from China-OTAI SPECIAL STEEL . we have more 16 years experience in 4140 steel plate, round bar, flat bar, square supply.AISI 4140 alloy steel is chromium, molybdenum, manganese containing low alloy steel. It has high fatigue strength, abrasion and impact resistance, toughness, and torsional strength. The following datasheet gives an overview of AISI 4140 alloy steel.

4140 alloy steel material is a high quality Quenched and Tempered Alloy Structural steel, It belong to the high quality medium carbon alloy steel, Oil Quenched & Tempered Hardenss is 28-34 HRC.4140 Annealing delivery hardenss less than 250HB.

ASTM 4140 Steel Application

4140 steel is medium hardenability steel with good strength and good comprehensive mechanical properties after heat treatment. It has good manufacturability. The maximum temperature of use is 427 °C. It can be used to make turbine fastener, tool bodies, forming dies, brake dies and etc. And it also as the material of Oil deep well drill pipe joints and fishing tools below 2000m.

AISI 4140 Steel Characteristics

1.It is low alloy steel with chromium, molybdenum, and manganese.
2.Great toughness, fatigue strength, abrasion and impact resistance.
3.It is widely be used in the industry due to its excellent versatility and usefulness.
4.The higher carbon content in it, the higher the strength and heat treatment capabilities it is.
5.It can be oil hardened to relatively high hardenability.

Test

How is SAE 4140 steel tested?

Our AISI 4140 steel round bar and steel plate composition detection is carried out by a spectrometer, which is fast, accurate and efficient in detection; hardness is tested by a hardness tester,
The hardness tester is based on the Leeb hardness measurement principle, which can easily and quickly measure a variety of metal materials. While displaying the hardness measurement value immediately, it can be freely converted between different hardness scales, and the tolerance limit can be set in advance, and it will automatically alarm when it exceeds the range.
1. Measuring range: (170-960)HLD,(17-68.5)HRC,(19-651)HB,(80-976)HV,(30-100)HS,(59-85)HRA(13-100 )HRB
2. Measurement direction: support 360° (vertical down, oblique down, horizontal, oblique up, vertical up)
3. Hardness scale: Richter (HL), Brinell (HB), Rockwell B (HRB), Rockwell C (HRC), Rockwell A (HRA), Vickers (HV), Shore (HS)
4. Display: quarter dot matrix LCD
5. Data storage: maximum 500 groups (impact times 32 to 1)
6. Working voltage: 3V (2 AA size alkaline batteries connected in series)
7. Continuous working time: about 100 hours (when the backlight is not turned on)

songshunsteel1826