Home > Products > Industrial Supplies > Machine Hardware > Fastener & Fitting

The TRM TRM061 rotating lifting ring has been technically inspected and complies with the EN1677-1 standard. The TRM TRM061-M30 metric thread length is 50mm, the net weight is 4kg, the working load is 6T, and it has a 4 times safety factor.The thread length of the rotating lifting ring can be made according to the requirements. The Terme rotating lifting ring has metric thread, metric fine thread, American system, imperial thread, etc.In addition, extended rotating lifting rings, non-standard and large tonnage can be produced.Deformed parts can also be made according to drawings.The rotating lifting ring and universal lifting ring can rotate 360 ​​degrees and allow lifting in any direction within a 180-degree range. The bolt body is marked with the allowable working load.The rotating lifting ring is made of alloy steel. Every detail has been carefully designed and built, and has also undergone testing and quality inspection, heat treatment, and mechanical processing. The environment in which the rotating lifting ring is used also has an important impact on the life of the lifting ring, so the surface of the rotating lifting ring has been specially treated. .Terme rotating lifting rings are made of high-strength alloy steel and have strong load-bearing capacity. Each batch of lifting rings must undergo multiple tests and tensile performance testing such as 4 times the safety factor, and data testing is performed on various types of products. Term rotating lifting rings The appearance is exquisite and available in red, orange, etc., which can be produced as required.