Home > Products > Chemicals > High Polymers

Neoflon® PFA AP-211SH

Perfluoroalkoxy

Product Description:
NEOFLON PFA AP-211SH is a fully fluorinated high purity PFA. Melt flowability and stress crack resistance are excellent. It is suitable for injection molded parts used for semiconductors.

Introduction

* AP-211SH is a copolymer of tetrafluoroethylene and perfluoro alkyl vinyl ether. At the same time, it is a high purity PFA with its end groups completely fluorinated.
* Good melt flowability while maintaining excellent properties of PTFE. It can be used for melt molding as a thermoplastic resin. Injection molding and extrusion molding are suitable.
* Excellent in melt flowability. Applicable for injection molded products. It has been used for injection molded parts for
semiconductors such as fitting nuts.
* Less eluted fluoride ions. Due to the fluorinated terminal group.
* The most excellent stress crack resistance in injection molding grade of PFA.
* Excellent chemical resistance which is not affected by most of the chemicals.
* Flexible and tough under the cryogenic to high temperature.
* Excellent heat resistance. Continuous use temperature is 260°C.
* Nonflammable like POLYFLON PTFE and NEOFLON FEP.
* Excellent weather resistance. No properties change even when exposed outside for a long time.

In good transport experiences to supports both by air or by sea to worldwide.

Also can be supports discount following from your order quantity.