Home > Products > Metallurgy , Mining & Energy > Metallurgy & Mining > Wire Mesh

Hengshui Guangxing Filter Material Co., Ltd.'s sand control screen pipe sand control refers to the correct selection of cementing and completion methods during the oil production process, the development of reasonable production measures, the control of production pressure difference, the limitation of seepage velocity, and the prevention of sand blockage measures based on the conditions of the oil layer and oil well.
Product name: Wedge shaped wire filter pipe drilling, sand prevention well pipe flower pipe wrapped wire pipe geothermal well filter pipe V-shaped wire filter pipe air conditioning well T-shaped wire filter pipe wrapped wire pipe strip seam pipe sand prevention pipe
Product advantages:
1. The outer layer of the product adopts a trapezoidal wire structure (V-shaped wire), also known as a wedge-shaped wire structure wrapped filter pipe, with high porosity and uniform gaps, especially suitable for fine sand and silt formations in water wells.
2. The filter pipe designed with a wedge-shaped wire structure is easy to backwash and not easily clogged.
3. Strength and deformation resistance: The internal part is supported by a base tube, and the external part is protected by a sieve tube. The overall strength of the base tube filter pipe is only 2-3% lower than the standard casing/oil pipe, and it has sufficient overall strength to resist the compression of the formation. Even when there is local deformation, the gap in the compressed area does not increase, and the reliability of sand control is high.
4. The filtering accuracy of the product is 0.01mm~2mm, which can be customized and produced according to customer requirements.
5. Is the opening area of the wedge-shaped wire filter pipe large and the filtration area ratio high, which can reach 60%
6. A larger filtration area can relatively reduce the pressure of water infiltration, prevent sand particles from entering the wellbore under high water pressure, thereby reducing friction between sand particles and equipment, reducing wear, and improving the service life of the equipment.
Product material: stainless steel 304  316L, low-carbon steel galvanized, titanium steel spray plastic, all can be customized according to customer requirements for production
Applicable environment: Gravel filling and sand control work in most wells such as vertical wells, inclined wells, directional wells, etc
Connection form: groove connection or threaded connection
Filter tube diameter: 140-630mm, can be customized and produced according to customer requirements.
Outer diameter of filter tube: 25mm-800mm
Filter tube gap: (mm): 0.10, 0.15, 0.2, 0.25, 0.30-3, can be made according to customer requirements
Filter tube length: 0-6 meters
Filter tube thickness: 2.75mm-10mm
Make the product suitable for deeper water wells, stone wells, geothermal wells, hot spring wells, vertical wells, inclined wells, industrial deep wells, and mines
Due to the wide variety of product specifications, most of which are customized products, with different specifications and sizes, all prices are different. Welcome to call for consultation!