Home > Products > Electronics & Electricity > Electronic Instrument > Test Bench

TN11278 Touch and Close Fasteners Fatigue Tester

INTRODUCTION

This machine is used to simulate the action of repeatedly peeling and fitting the adhesive belt (Velcro belt) to test its anti-fatigue performance. After a certain number of times, roll the specimen with the weight of the roller itself to make it uniformly fit, and then use a separate tensile testing machine to measure its shear strength and peel strength.

Install plexiglass protective cover for safer operation.

TECHNICAL PARAMETERS

1.Engaged wheel diameter : 162.5± 0.5mm

2.Driving wheel diameter : 160± 0.5mm

3.Groove width on the roller : 55±2 mm

4.Roller width : ≥70 mm

5.Roller speed : 60±5 rpm

6.Counting range : 0~999 99 times can be set, standard requirement of 1000 times or 3000 times

7. Reverse time : 0~99 s can be set, the standard requires every (30±5) s reverse

8.Sample force : (1±0.1) N/mm× the width of the sample (mm), can be adjusted

9.Dimension : 55×45×57 cm

10.Power supply : AC220V, 50/60 Hz

11.Weight : about 45 kg

STANDARDS

DIN 3415,GB/T 23315-2009,HG/T4996,HG/T 5294,QB/T 5412,QB/T 4861,QB/T 4331,GB/T 3903.20,GB/T 3903.21

ORDERING INFORMATION

11278-1  Tension Test Roller 

Our products are all certified by international authority,national metrolog inspection center, won praise from customers all over the world ,including SGS,ITS,BV,TUV Sud,TUV Rheinland,CTI,etc

NEW TOTAL SOLUTIONS

HONOR AND CERTIFICATES

STANDARD PACKING

MULTIPLE TRANSPORTATION

Payment Terms︰ T/T