Home > Products > Agriculture & Foods > Processed Food > Other Processed Food

Axial flow fan 1Axial flow fan 2Axial flow fan 3
  • Axial flow fan 1
  • Axial flow fan 2
  • Axial flow fan 3

Axial flow fan

Model:T35NO10A
Brand:huashide
Origin:Made In China
Category:Agriculture & Foods / Processed Food / Other Processed Food
Label:fan , Axial flow fan
Price: ¥2900 / pc
Min. Order:1 pc
Inquire Now

Member Information

Detail

Huashide (Shandong) Fan Co., Ltd

Biz MemberShan Dong - China
Last Online:24 Dec, 2024

Product Description

 

Maintenance of the fan

1) Cautions in fan maintenance:

The fan can only be put into operation in normal condition.
When the fan is started-up after inspection, attention should be paid to see

weather each component is ok or not.

Check periodically the dust and contamination inside the fan to prevent rust.

Maintenance can be carried out during shut down of fan to assure operators

safety

2) Cautions in normal operation of the fan

During the star-up, shut-down or operation of the fan, if some abnormal thing

happens, inspections shall be carried out immediately; if it is small failure, the reason shall be checked out and eliminated, if it is a big failure, the fan shall be stopped and inspection and maintenance shall be made immediately.

Replace lubricant grease of motor bearing according to the real condition.

The main failure and reason of the fan

1) severe vibration of the fan

friction between casing (or suction unit)and impeller.

Foundation is not rigid enough or firm enough.
loosing of rivets in impeller or deformation of impeller.
Loose match of shaft with impeller disc
Loose of connecting bolts between casing and support, and between motor and

support.

The installation of inlet and outlet ducts is improper which causes the casing

deformation and resonance.

Rotor unbalance caused by dust, contamination on blades, wear of blades,

deformation of impeller and bending of shaft.
2) High rise of bearing temperature

severe vibration

lubricant is poor in quality, deteriorated, mixed with dust, sand, contamination

and etc, or insufficient in quantity.

Wornout of rolling bearing
3) Overcurrent and high temperature rise in motor.

The valves on inlet and outlet pipes are not closed completely when starting-up.

Input voltage is low or a single phase of power supply is cot out.
Influence caused by severe vibration
The speed of main shaft is bigger than the rated value.

Supply scope of fan unit

One fan, one driving motor and 4 sets of foundation bolts

Purchase information

1when purchasing, indicate the size, speed, flow, pressure, discharge angle and rotating direction of the fan, and the model, power, and speed of the motor.

2Also, indication shall be made clearly when ordering, if you need inlet filter, silencer, inlet and outlet soft connection, vibration absorbing platform and vibration absorber.

Huashide(shandong)fan Co.Ltd

Http:www.hsdfans.com

Add:kunmingrod.linyi.P.R.china

E-mail:17853928877@163.com

 Http:www.hsdfans.com

Tel: 17853928877


Product Image

Axial flow fan 1
Img 1
Axial flow fan 2
Img 2
Axial flow fan 3
Img 3

Send Inquiry to this Member

Huashide (Shandong) Fan Co., Ltd

Huashide(shandong)fan Co.Ltd Http:www.hsdfans.com Add:kunmingrod.linyi.P.R.china E-mail:17853928877@163.com

Phone:
86-17853928877
Fax:
86-17853928877
Contact:
zhu sir (GM)
Mobile:
17853928877

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Other Processed Food Made In China Products

,  

Other Processed Food China Suppliers and China Manufacturers