Home > Products > Electronics & Electricity > Other Electrical & Electronic

Anchoring clamps are designed to anchor nsulated overhead lines with insulated neutral messenger and self-supporting BC lines from 2 to 4 cores.

The clamps type PA/EA 1500-2000 are made of a body in black UV resistant plastic reinforced with fiberglass and anti UV black resistant plastic wedges slide inside the body to grip the conductor.

The clamp types PA/EA 95-2000 are made of a body in aluminium alloy die casted and anti UV black resistant plastic wedges slide inside the body to grip the conductor. A flexible stainless-steel bail protected by a plastic saddle allows the fixation to the bracket.

The self-supporting type clamp is a self-adjusting clamp which pilot wires or street lighting conductors remain alongside the clamp. The clamps are equipped with hot dip galvanized metallic arms with M10 bolts (wrench 17 mm) and anti UV black resistant plastic wedges that slide inside the arms to grip the conductors. Opening of the wedges is made simple thanks to its integrated spring which helps open the clamp, which also facilitates insertion of conductors. The clamp is also fixed to pole hooks with a M12 screw bolt equipped with a M12 self-blocking nut for quick and simple installation.

Features:

1. The clamp resists to temperature variations and climatic conditions.
2. These products are delivered either single (clamp PA or bracket CA), assembled (clamp+bracket) with one or two clamps.
3. Used The bracket is the standard item with two holes.