Home > Products > Electronics & Electricity > Other Electrical & Electronic

HV-30 small load Vickers hardness tester is the first generation of opto-electromechanical integration of high-tech products, the machine has a novel shape, with good reliability, operability and intuition, is the use of precision mechanical technology and optoelectronic technology of the new type of Vickers and Nuopu hardness testing equipment. The machine adopts computer software programming, optical measurement system. Through the soft key input, you can choose the measurement of Vickers and Knoop hardness, can adjust the intensity of the measurement of the light source, can choose to keep the load time, in the LCD display can show the test method, the test force, through the panel input measurement of the diagonal length of the indentation, the screen reads out the value of the hardness directly, easy to look up the table of the cumbersome, easy to use, high precision measurement. The Vickers hardness tester high-quality measurement of mounting and microscopic eyepieces a measurement reading structure, so that the hardness measurement is more correct and convenient. The Vickers hardness tester can be equipped with optional photography device, can be measured indentation and material metallographic organization for filming, and data processing and analysis, greatly improving work efficiency.

Performance characteristics.

1、Automatic loading and unloading test force mechanism, the test force holding time can be arbitrarily selected between 0 and 99 seconds.

2, the use of computer software programming, can be Vickers and Nu scale conversion between

3, stable optical measurement system, can adjust the intensity of the measurement light source

4、Panel display directly shows the hardness value, easy to use and high precision measurement

Measuring range: tiny, thin, surface penetration coating specimens and glass, ceramics, agate, artificial gemstones and other brittle and hard materials. Is a scientific research instit

tions, enterprises and quality inspection departments for research and testing of the ideal hardness testing equipment.

Technical parameters:

Product Model：HV-30

Six-step force (Kgf): 1, 3, 5, 10, 20, 30

Eight force (Kgf): 2, 5, 8, 10, 12, 15, 20, 30

Test force loading: automatic (add/remove/hold/unload)

Test force loading speed: 0.2mm/s

Compliance with standards (accuracy): GB/T4340.2 national standards, JJG151 calibration regulations;

Micrometer eyepiece magnification: 10X (mechanical eyepiece)

Minimum detection unit: 0.5μm (optional 0.25μm)

Micrometer eyepiece moving mode: 0.4 pitch screw

Measurement data acquisition method: Manual acquisition

Measurement data calculation method: Automatic calculation

Objective lens magnification: 10X (observation), 20X (measurement)

Total magnification: 100X (observation), 200X (measurement)

Hardness value display mode: electronic small screen (120 × 22mm)

Tower control mode: manual control

Conversion scale: HV, HK, HBW, HRA, HRB, HRC, HRD, HRF, HR15N, HR30N, HR45N, HR15T/30T/45T

Built-in printer: No

Number of test storage groups: None

Hardness theoretical measuring range: maximum hardness value of 6000, minimum hardness value of 0.001

Test force reading: rotating and twisting change, automatic reading

Test force holding time: 0-99 seconds (s)

Brightness adjustment of light source: 0-100% adjustable, 5% step

Maximum height of test piece: 220 mm

Distance from indenter to inner wall: 130mm (counting from the center)

Overall dimensions: 680 (H) × 216 (W) × 565 (D) mm

Power supply: 220V/50Hz