| Model: | - |
|---|---|
| Brand: | - |
| Origin: | Made In China |
| Category: | Chemicals / Chemical Auxiliary & Catalyst / Chemical Auxiliary |
| Label: | - |
| Price: |
US $180
/ Ton
|
| Min. Order: | 1 Ton |
| Last Online:19 Dec, 2024 |
Polymeric aluminium chloride, also known as polyaluminium chloride abbreviation PAC, it is an inorganic polymer polymer, adapt to a wide range of waters, fast hydrolysis, strong adsorption capacity, the formation of alum flowers, dense precipitation fast, low turbidity of the effluent, good dewatering performance, etc.
It is a water-soluble inorganic flocculating polymer. Depending on the scope of use. PAC has three types: High Purity PAC, Drinking Water Grade PAC and Industrial Grade PAC
| Name
Item |
Polyaluminum Chloride for Sewage |
Polyaluminum chloride for drinking water |
White polyaluminum chloride |
|
Aluminum chloride（AL2O3）％≥ |
28 |
29 |
30-31 |
|
Appearance |
yellow |
Yellow powder / granule |
White / milky hite powder |
|
Alkalinity ％ |
45-90 |
40-90 |
40-90 |
|
Water insoluble matter％ ≤ |
0.4 |
0.2 |
0.2 |
|
Iron（Fe） ％≥ |
0.02 |
0.005 |
0.005 |
|
PH(1％aqueous solution) |
3.5-5.0 |
3.5-5.0 |
3.5-5.0 |
|
Arsenic（As）％≤ |
0.0001 |
0.0002 |
0.0002 |
|
Lead（Pb）％≤ |
0.0005 |
0.001 |
0.001 |
|
Cadmium（Cd）％≤ |
0.0001 |
0.0002 |
0.0002 |
|
Mercury（Hg）％≤ |
0.00001 |
0.00001 |
0.00001 |
|
Chromium （Cr+6）％≤ |
0.0005 |
0.00002 |
0.00002 |
|
Safety |
Harmless No-Flammable |
||
|
Shelf Life |
1 years with proper storage |
||
Packaging and Storage Precautions:
This product is non-toxic, need to be moisture-proof, rain-proof, avoid direct sunlight. The particle size of this product is 20-80 mesh, can also be produced according to user requirements. The product is lined with plastic bag and kraft paper bag, divided into 25kg/bag and 1000kg/bag.
Usage and Precautions: It is recommended that an aqueous solution be used at a concentration of 0.1% to 0.3% and preferably formulated with neutral and desalinated water. The most economical dosage is determined by preliminary tests and the pH of the water to be treated is adjusted prior to treatment. During formulation, the polymer hydrogel should be dispersed uniformly in the agitated water to ensure adequate contact. Heating the water (below 60 degrees Celsius) can accelerate dissolution, which takes about 3-15 minutes. Due to the viscous nature of PAM, the work area should be rinsed frequently to keep it clean.
| Payment Terms: | TT |
|---|---|
