Home > Products > Electronics & Electricity > Electronic Components > Integrated Circuit

SSP721A is a single chip transceiver developed for Meter-Bus standard (EN1434-3、EN13757) applications. The SSP721A interface circuit adjusts the different potentials between a slave system and the Meter-Bus master. The connection to the bus is polarity independent and supports full galvanic slave isolation with optocouplers. The circuit is supplied by the master via the bus. Therefore, this circuit offers no additional load for the slave battery. A power-fail function is integrated. The receiver has dynamic level recognition, and the transmitter has a programmable current sink. A 3.3V voltage regulator, with power reserve for a delayed switch off at bus fault, is integrated.

Features

• Meter-Bus Transceiver (for Slave) Meets Standard EN1434-3、EN13757
• Receiver Logic With Dynamic Level Recognition
• Adjustable Constant-Current Sink via Resistor
• Polarity Independent
• Power-Fail Function
• Module Supply Voltage Switch
• 3.3-V Constant Voltage Source
• Remote Powering
• Up to 9600 Baud in Half Duplex for UART Protocol
• Support multiple slave power supply modes
• Slave Power Support：

        －Supply From Meter-Bus via Output VDD；

        －Supply From Meter-Bus via Output VDD or From Backup Battery；

        －Supply From Battery, Meter-Bus Active for Data Transmission Only；

• SOP-16Package

Applications

•  M-BUS remote meter reading slave station
•  M-BUS security slave station
•  M-BUS smart home slave station