Home > Products > Construction & Decoration > Pipe, Tube & Parts > Plastic Tube, Pipe & Hose

PE Pipe for Water Supply (PLUS)

PE municipal water pipe, municipal water line fittings manufacturers give you an introduction to PE water supply pipe. PE water supply pipe material is mainly PE80 and PE100 two grades, different grades of PE80 and PE100 correspond to different pressure strength. The quality of our municipal pe water service pipe meets the requirements of GB/T13663.2 and ISO4427-2 standards.

PE Pipe for Water Supply (PLUS) Specification 

The maximum DN of the pipe reaches 1600mm, and we also offer special sizes of customized services. Please click message board below to mail us.

PE Pipe for Water Supply (PLUS) Description

Jiang te's pipes are categorized according to the nominal wall thickness (mm), pressure strength (SDR), and nominal outside diameter (dn) of the product to provide the sizes required by the customer.

In addition to the commonly used sizes, Jiang te can also customize special sizes and provide customized logos. For more details of product requirements, you are welcome to communicate with us.

Why Choose JIANGTE PE Pipes for Water Supply?

JIANGTE PE water supply pipe has a series of advantages such as high toughness, corrosion resistance, anti-cracking, stable interface, lightweight and easy to construct, etc. It is widely used in urban water supply. In addition to the traditional excavation method for construction, it can also be constructed by non-excavation technology. Specific features are as follows:

Small Density: With a density of about 0.94~0.965g/cm, these lightweight pipes are easier to carry and install than traditional steel or cast iron reducing labor and installation costs.

Elongation at Break: With over 500% adaptability, these pipes handle uneven settlements and poor construction conditions offering excellent seismic performance.

Flexibility: Soft and flexible, small diameter polyethylene pipes can be coiled for longer lengths, reducing the need for fittings and material costs. Ideal for trenchless construction, they allow flexible direction changes.

PE Pipe for Water Supply (Plus) Features

01

Light Weight

Light weight tube, easy to handle.

02

Resistant to Low Temperature & Acid & Alkali

Excellent impact resistance, good low-temperature resistance, low-temperature embrittlement temperature up to -70 degrees Celsius.

03

Durability

Tubes are designed to last 50 years without frequent replacement.

04

Safety and Health

Good hygiene, solving the problem of secondary pollution of drinking water, in line with GB/T17219-1998 health and safety evaluation regulations.

05

Hot-melt Connectable

Pipes are connected by heat fusion for reliable performance and low leakage rate in the pipe network.

06

Good Toughness

Resistant to twisting and earthquakes.

07

Stabilise

Good chemical stability, resistant to various acids, alkalis, salt corrosion.

08

Convenient and Fast

Convenient construction, simple welding process, low overall project cost.

As one of municipal water pipe suppliers, we will do our best to meet all the needs of customers.