Home > Products > Electronics & Electricity > Electronic Instrument > Other Electronic Instrument

The UV-power Integrator is a small, self-contained, high quality UV measuring instrument. It is designed to measure and display peak UV intensity in mW/cm2 and UV dosage in mJ/cm2 in the UV curing process.

In the standard version it is equipped with one UV sensor for the measuring of:
Full UV 230 – 410 nm

With this total UV band peak energy and dose measuring, most of the measuring requirements of UV curing applications can be covered.

Due to its UV sensor and the integrated microprocessor the UV-power Integrator can measure and display the peak UV-intensity of the total UV spectrum (mW/cm2).
Additionally, this UV-measuring instrument is calculating the UV-dosage (mJ/cm2) of the UV energy supplied during the time of exposure of one measuring cycle. The UV-dosage is calculated as the total Integral of UV-dosage over the full UV spectral bands.

The sensor is on the back of the unit which also serves as a heat shield.
After completion of the measuring cycle the measuring results can be scrolled through on the built in 2 x 16 digit LCD display.
A special AUTO-OFF feature that turns off the unit automatically after one minute serves as energy saving and extension of the battery service life.

The UV-Power Integrator is available in five different measuring ranges:

(Please state upon order)


Item 40.1.1 UV-Power Integrator, Type 1 UV-V 350 – 460 nm
Item 40.1.2 UV-Power Integrator, Type 2 UV-A 315 – 410 nm
Item 40.1.3 UV-Power Integrator, Type 3 UV 230 – 410 nm
Item 40.1.4 UV-Power Integrator, Type 4 UV-B 280 – 315 nm
Item 40.1.5 UV-Power Integrator, Type 5 UV-C 230 – 280 nm