Home > Products > Industrial Supplies > Plate Making & Printing Machine

     Box products such as trash cans and storage boxes have huge internal spaces and must be supported when hot stamping is performed on the outside of the box. At this time, it is very important to have a cantilevered workbench or a fixture that can support the box. If the product has a large size, a cantilevered workbench is more suitable, so as to avoid the height of the hot stamping machine from being too high.
     It is also very important to position the product. It is not convenient to adjust the position from the inside of the product, but it is easier to adjust the position of the hot stamping machine from left to right and back and forth from the outside of the product.
    Another problem with hot stamping box products is that the ironing plate may need more front and rear space to ensure that the hot stamping position is in the middle of the box. 

Advantage 

• Workbench using a special cantilever structure, which will help to place different types of turnover box;
• Table can be up and down, the precision adjustment, to facilitate the adjustment of the precise location of the gilt;
• Table lifting screw adjustment, simple and convenient;
• Relays for process control, stable operation, easy maintenance;
• The use of advanced temperature control system, the temperature can be set freely, high precision temperature control, with automatic temperature control;
• leveraged cylinder pressure, the pressure is uniform and strong;
• The basic parameters of the hot stamping process; temperature, pressure, hot pressure, the rolls of time in accordance with the process requirements of the flexible adjustment;
• Motor to control the delivery of the gold foil paper, resin length can be flexibly adjusted according to the size of the stamping area;
• Using high strength steel, gilt plate and table, has a very high flatness;
• Heating tube for heating, heat supply is stable, easy to replace