Electric conduction silver paint
Product Description
The electric conduction silver paints SCP to be possible to provide thin and smooth, the adhesion strong, the soft film. This film has the extremely high electrical conductivity in the wide material scope, may apply in the plastic, the paper material, the lumber, the textile, the glass, the ceramics and the metal and so on. This product may use spurts, brushes, soaks or moistens spreads and so on crafts to carry on the spreading, may cure under the room temperature. product use: this product may apply in the printed wiring board design, the repair, maintains the heating the postpositioned window screen, the read-write mark and so on. For example: May apply, the magnetic tape, the plastic screen outer covering and so on resists the high frequency electric field the harm, may also apply in meets the grounding, to scan in the microscope to eliminate the initial electron, but may also apply superficial which, the galvanization prefabrication surface layer, the faying surface, the potential difference mark cannot weld in the connection and so on. characteristic: * uses the SCP product economy to be practical, only needs the spreading thin film then to be possible to achieve the operation requirements. * has the very good electrical conductivity and the low surface resistance. * has the extremely good coherence in the wide material scope. * may carry on processing under the room temperature. application: before use should stir or shaking fully, guaranteed that by the spreading surface clean, dry, does not have the fat, the grease stains and the contamination, but substitutes the metal covering safely, after the use, may avoid the resolver volatility. After the application, uses Yi Ligao the transparent film protecting agent to be possible to prevent to produce the oxide compound or the compound which to form by the silver, may prevent the machinery harm.if a need stronger coherence, may bake SCP under 150°C the condition. protective measure: the resolver's volatility is low, should pay attention evades the rabbit inspiration density excessively high volatile solvent. performance: scattered solid: Laminated aluminum dusting powder carrier: Component solvent thickness: Milk greasy proportion @20°C: 1.71 surface resistance @0.6--2g/100cm2 0.01-0.03 Ohms/sq electric power 0.1-1W/cm2 drying time @20°C: 10 minute temperature range: -80°C - +125°C flash point: -18°C packing: Ordering number: 3g bottled SCP03B
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,